Amorim Wise Cork Pure UV

Amorim Wise Cork Pure UV has a natural cork structure, that provides superior comfort and environmental performance for commercial areas, with a genuine cork veneer decorative layer and UV varnish finishing. This product is used as a floor covering for commercial use, providing several physical characteristics to the floor, such as stability, comfort, thermal and noise insulation, among others.

The manufacturing process of Amorim Wise Cork Pure UV begins with cork granulate production, using cork that was previously treated at Amorim Florestal. Around 88% of the granulated cork previously produced is forwarded to an agglomeration process in which a melamine-urea-formaldehyde (MUF) resin is used to produce the agglomerated cork layer. This layer is the inferior layer of the final product and constitutes most of the thickness of the product. The remaining granulated cork, together with a polyvinyl acetate (PVA) resin, is used to produce the genuine cork veener, the decorative layer of the Amorim Wise Cork Pure UV. The agglomerated cork layer and the decorative genuine cork veener, that compose the final product structure are glued together using glue and adhesives as binding agents. This unfinished product then follows to a pressure and heat process, before going through sanding. The product is ultimately varnished with a base coat as well as a top coat varnish and finished by an UV (ultraviolet) drying process. The result of this process is then forwarded for the final cut of the pieces and ultimately packed and stored in the shipment warehouse, ready for shipment. Technical data: Relevant technical construction data for the product is referred to in the following table. Declared unit: The declared unit is 1 m2 of installed floor covering with the following characteristics:

Amorim Wise Cork Pure UV fits the most demanding needs for commercial areas. This flooring product meets the requirements of the usage class 33 for commercial use according to ISO 10874 standard.