AMP L 10000-840 PC WB EVG

This data set has been modeled according to the European Standard EN 15804+A2 for Sustainable Building. Results are depicted in modules that allow the structured expression of results over the entire life cycle. Transport modul: A Standard scenario with a truck with a transport distance of 700 km in Europe is considered. The weight of the transported unit includes product with packaging. Use-stage modul: During the use-stage, consumption of electricity is calculated, based on a for the declared product characteristical, standardardised scenario. All use-scenarios are defined in the [PCR part B] of IBU. Not only annual operating time, average product lifetime and power consumption is considered but also additional influences like stand-by circuits, dimming function and more. The following electricity grid mix is applied by default: EU Allocation of waste material: For the treatment of production residues the calculation considers the increased demand of materials' input resulting in production residues during manufacturing. These material flows are not connected to an EoL-scenario. Avoided burdens for secondary material in case of potential recycling are not included. End-of-life modul: As an EoL scenario the product as well as the replacement parts are assumed to be collected to 100% (legal requirements defined within WEEE directive). The product and replacement parts are fed to a generic shredding process with fixed demand on electrical energy per input mass (C3) of 1,2 MJ/kg, resulting in different waste fractions. For the amount of metal flows respective recycling processes are considered, including recycling losses. Environmental burdens of recycling processes, as well as avoided burdens for secondary materials are assigned as total value in module D. The plastic fraction is fed into a process for waste incineration (B4/C3). The calculation of emissions from the waste incineration plant follows a partial stream consideration for the combustion process, according to an average mix of plastics.

Apparecchio stagno LED in protezione IP66, con Drip-Edge-Effect che inibisce il deposito di sporco e polvere per le massime esigenze igieniche. Potenza impegnata apparecchio: 69,1 W. reattore elettronico. Converter LED; meccanismo brevettato InvisiClick per montare e aprire il rifrattore senza clips. Rifrattore e coppa in policarbonato antiurto, stampato a iniezione in pezzo unico, termoresistente e anti-UV. Durata dei LED: 100000 h con rimanente 90 % del flusso luminoso iniziale. Tolleranza colore (MacAdam): 3. Flusso luminoso apparecchio: 10110 lm, Efficienza apparecchio: 146 lm/W; resa cromatica Ra > 80, temperatura di colore 4000 K. Apparecchio ad emissione simmetrica a fascio largo (wide beam). Concezione qualitativa di luce diretta/indiretta per soluzioni ideali in ambienti industriali e parcheggi interrati. Montaggio con graffe standard V2A su soffitto, parete o binario portante.; innesto pentapolare. Adatto a cablaggio passante con cavi H05VV o NYM (10A). Temperatura ambiente: -25°C a +35°C. Omologato per impiego in ambienti interni con montaggio in posizione orizzontale e verticale (vedi istruzioni di montaggio). Nota: interpellate il vostro consulente nel caso la destinazione preveda ambienti con agenti chimici aggressivi, forte umidità e condensa o forti sbalzi di temperatura.. Conforme agli standard internazionali dell’industria alimentare. Designed per BESA box. Omologato per impiego in ambienti dove si prevede che sugli apparecchi si possa depositare polvere conduttiva (EN 60598-2-24). Classe isolamento: SC1, Collaudo filo incandescente 850°C. Apparecchio cablato senza alogeni e senza silicone., Resistenza all'urto: IK08. Misure: 1600 x 92 x 90 mm; peso: 3,27 kg.. The manufacturing process includes production technologies such as plastic injection moulding, plastics processing, metalworking and powder coating, as well as the operation of highly automated systems for assembling the products. All primary and secondary data are modelled to be specific to the technologies or technology mixes under study. Where technology-specific data are unavailable, proxy data are used. Technological representativeness is considered to be good.

The declared product is a professional LED luminaire that is used for application 'Retail'.