BauderTHERMOFOL

BauderTHERMOFOL are synthetic roofing and waterproofing membranes based on polyvinyl chloride (PVC-P) with a synthetic fibre core. The product range is divided into the following variants: BauderTHERMOFOL U (12/15/18/20/24) Embedded polyester reinforcement BauderTHERMOFOL U (12/15/18/20) FR Embedded polyester reinforcement and increased fire protection BauderTHERMOFOL U (15/18/20) V Embedded polyester reinforcement, special fleece lamination on the underside BauderTHERMOFOL M (12/15/18/20) Embedded polyester reinforcement The reported results declare an average over all BauderTHERMOFOL products. The averaging is based on the corresponding production quantities (by area produced).

PVC-P roofing and sealing membranes are manufactured in a two-stage process. In the first step, the raw materials are mixed together and plasticised on an extruder. The plastic mass is rolled out into films on a calender. In the second step a polyester fabric reinforcement will be embedded. Some of the PVC-P roofing and sealing membranes receive a special fleece lamination on the underside. After cooling and final edge trimming, the products are made-up. All production waste is treated internally. Recyclable fractions are recycled and directly reintroduced into the production process. Non-recyclable components are disposed of. Permanent measurement of product quality and continuous improvement of internal processes is ensured due to ISO 9001 certified quality management system. Technical data: BauderTHERMOFOL M Declared unit: The declared unit is the production of 1 m² of the production quantity weighted average for the mechanically or ballasted, hot air sealed BauderTHERMOFOL roofing membrane variants U (12/15/18/20/24), U (12/15/18/20) FR, U (15/18/20) V and M (12/15/18/20) including packaging materials.

The PVC-P roofing and waterproofing membranes are laid in a single layer and hot-air welded at the seams. The wind suction is secured by mechanical fastening, by ballast or by bonding. Roof waterproofing Single-ply waterproofing of non-utilized and utilized roofs (e.g., solar roof, green roof) in flat and pitched form. Building waterproofing Single-layer waterproofing of non-water-tight structures and building components against soil moisture and non-pressing water. BauderTHERMOFOL roofing and sealing membranes are used according to requirements: - mechanically fixed, - ballasted or - adhered.