Raw HDF board

The data selected for LCA originate from ITB-LCI questionnaires completed by Raw HDF board using the inventory data, ITB database, Ecoinvent database v. 3.10 and KOBiZE. No specific data collected is older than five years and no generic datasets used are older than ten years. The representativeness, completeness, reliability, and consistency are judged as good. Polish electricity was calculated based on Ecoinvent v 3.10 supplemented by actual national KOBiZE data. Polish electricity mix used (production) is 0.685 kg CO2/kWh (KOBiZE 2023). The allocation rules used for this EPD are based on general ITB PCR A, v. 1.6. Raw HDF board production is a line process with multiple co-products in one factory located in Grajewo (Poland). Allocation is done on product mass basis. All impacts from raw materials extraction and processing are allocated in A1 module of EPD. 99% of impacts from line production were inventoried and allocated to all Raw HDF board production. Municipal waste and waste water of whole factory were allocated to module A3. Energy supply was inventoried for whole production process. Emissions in Woodeco were measured and were allocated to module A3. Packaging materials were taken into consideration. They are recycled in a closed loop. The life cycle analysis (LCA) of the declared products covers product stage – modules A1-A3, end of life – modules C1-C4 and benefits and loads beyond the system boundary – module D (cradle-to-gate with options) in accordance with EN 15804 + A2 and ITB PCR A, v. 1.6. The details of systems limits are provided in product technical report. All materials and energy consumption inventoried in factory were included in calculation. Office impacts were also taken into consideration. In the assessment, all significant parameters from gathered production data are considered, i.e. all material used per formulation, utilised thermal energy, internal fuel and electric power consumption, direct production waste, and all available emission measurements. It can be assumed that the total sum of omitted processes does not exceed 5% of all impact categories. In accordance with EN 15804 + A2, machines and facilities (capital goods) required for the production as well as transportation of employees were not included in LCA.

High-density fibreboard manufactured on the basis of wood fibres, bonded with synthetic resins and other additives. The product is available in many formats and thicknesses in the range of 1.5 - 5.2 mm. The surface of HDF boards can be additionally sanded and refined by varnishing, wrapping and laminating with decorative materials. HDF boards are used for the production of furniture, doors, floor and wall panels and decorative elements. Additionally in shop and fair stands finishes, as well as caravan and campervans interior elements. The quality of high-density thin fibreboard is determined according to EN 622-1. More information can be found on Woodeco MDF sp. z o. o. website: https://www.woodeco.eu