Emission factor from EU CBAM 2026/1740 Regulatory default
Aluminium containers for compressed or liquefied gas - CN 7613 00 00, total emissions
Bolivia · CBAM embedded emissions · Default value, 2025 data
Default value for goods made in Bolivia
1.15kgCO₂e/kg
Regulatory default · Fossil only · GWP100 · AR5
FossilBio CH₄Land useBio CO₂EN 15804 GWP-fossilOne value, valid from 1 January 2026
EU CBAM sets this validity and gives no value for another period, so there is no year to pick.
Reference year 2025
- Country of production
- Bolivia BO
- Boundary
- CBAM embedded emissions
- Data quality
- LowRated by us, not by the source
- Licence
- Open · CC BY 4.0
- CN code
- 7613 00 00
- Production route
- (L) secondary Aluminium
Where 1.15 comes from
EU CBAM prints this factor as a single figure, with no parts to add up and no split by gas.
Reporting this kilogram under the GHG Protocol
3.1 Goods we buy 1.15
You buy the goods as a material: everything CBAM counts up to the EU border is your category 1, purchased goods. It undercounts a cradle-to-gate footprint.
The factor, standardised
Every factor on open-climate.ai answers the same questions in the same words, whatever the publisher. Open any ⓘ for the definition.
Manufactured goods › Other manufactured goods · Bolivia · per kg · Generic
CBAM embedded emissions · Fossil only · AR5
- BoundaryCBAM embedded emissionsEmbedded emissions of a CBAM good as the EU defines them: the direct emissions of the production processes at the installation (the EU ETS installation boundary), the indirect emissions of the electricity those processes consume, and the embedded emissions of the relevant precursors. Learn more
- CBAM embedded emissions
- Raw materials, fuel combustion, manufacturing and purchased energy
- GWP methodWhich IPCC assessment report's warming potentials convert each gas to CO₂e, and over how many years the warming is counted (GWP100: 100 years). Learn more
- IPCC AR5, 100-year horizon
- As printed by EU CBAM
- CO₂e basisWhich carbon the CO₂e counts. Fossil only leaves out biogenic methane, land-use change and biogenic CO₂; excl. biogenic CO₂ counts biogenic methane but not the other two; net total counts every pool, net of removals. The same activity on two bases is two different numbers. Learn more
- Fossil onlyFossilBio CH₄Land useBio CO₂EN 15804 GWP-fossil
- Not split by gas; CO₂e only
- Life cycle
- Upstream: not coveredProduction: partly coveredDownstream: not coveredEnd of life: not covered
Low quality · Open licence · Any year
What this number covers
Embedded emissions: what EU CBAM counts to make one kilogram of an imported good. Direct emissions, its precursors, and electricity where printed.
Direct emissions1.15
Precursors
Emissions already in the inputs, made on site or bought in.
IncludedFuels and process materials
CO₂ from the fuels burned at the plant and from process materials such as carbonates.
IncludedProduction process
The process at the plant that makes the good.
Included
Electricity used
Indirect, counted where the EU prints it. Here it prints N/A.
Not printedAt the EU border
1 kg declared. The factor is per kg imported.
= 1.15
Outside this boundary
- Fuel supply chain
- Transport to the plant
- Transport to the border
- Plant and equipment
- Packaging
- Use
- End of life
- Recycling credit
Gases
- CO₂ · counted
- N₂O · nitric acid and fertilisers only
- PFCs · aluminium only
- CH₄ · never
A mark-up is a policy value, not a measurement
AssignedFor 2026 to 2028 the law adds a mark-up to this default, to push importers towards the plant's own figure. It says nothing about how the good was made, so this page shows the default without it, never as a new year of data.
- N/A in the indirect column means not printed, never zero.
- The direct emissions are the whole total here, so no separate direct factor is served.
- A regulatory default: not comparable with a GHG Protocol cradle-to-gate factor.
From EU CBAM's record to a comparable factor
EU CBAM publishes this factor as one record. Here is each field as printed and what open-climate.ai made of it.
About this factor
From the European Commission
The regulation's system boundaries
3.1. Cross-sectoral rules Specific embedded emissions shall be calculated as the emissions of the production process and, for complex goods, the embedded emissions of the precursors to produce the functional unit of the good during the reporting period. The system boundaries are defined per aggregated goods categories and cover the direct emissions, the indirect emissions from electricity consumption where relevant under Regulation (EU) 2023/956, emitted by all processes directly or indirectly linked to the production processes, and the embedded emissions of precursors, independently of whether these precursors are produced in the installation or acquired from a different installation. In addition to these general rules, the specific details of each aggregated goods category are set out in points 3.2 to 3.19. Any CBAM goods produced by means of a production route not listed in points 3.2 to 3.19 is subject to the cross-sectoral rules described in this point, and to the sector-specific rules if the production route is a combination of the production routes listed in in points 3.2 to 3.19. The purchase and maintenance of infrastructure and equipment are excluded from the system boundaries. When the production process of complex goods listed in Annex II to Regulation (EU) 2023/956 includes one or more precursors not listed in that Annex, the indirect emissions of those precursors will be included in the calculation of the embedded emissions of the complex goods. When the production process of complex goods not listed in that Annex includes one or more precursors listed in that Annex, the indirect emissions of these precursors will not be included in the calculation of the embedded emissions of the complex goods.
3.18. Aluminium products 3.18.1. Special provisions None. 3.18.2. System boundary For aluminium products, direct emissions monitoring shall take into account: — all processes directly or indirectly linked to the production processes emitting CO 2 emissions from combustion of fuels and process emissions from flue gas treatment, excluding the following processes: cutting, welding and finishing of aluminium products.The European Commission gives no description for this value. It is a default value from Commission Implementing Regulation (EU) 2026/1740, Annexes I and IV.
Source and licence
- Publisher
- European Commission (DG TAXUD), Carbon Border Adjustment Mechanism
- Published
- 6 August 2026
- Valid from
- 1 January 2026
The values and their metadata are served in full and may be reused with credit to the publisher.
Cite this factor
© European Union, 1995-2026. Commission Implementing Regulation (EU) 2026/1740 of 20 July 2026, Annexes I and IV. Reuse authorised under Commission Decision 2011/833/EU (CC BY 4.0). Normalised by open-climate.ai, https://open-climate.ai/factors/libraries/cbam/ (CC BY 4.0). https://open-climate.ai/factors/ef-cbam-aluminium_containers_for-bo-kg-cbam_embedded-c9bdd054/?v=efv1-697610034c42f4598155a775e82aa278
Something looks wrong?
Tell us which value and why. We check it against the source and answer within a week.
Page data as of .