Emission factor from EU CBAM 2026/1740 Regulatory default

Wood screws of iron or steel other than stainless (excl. coach screws) - CN 7318 12 90, total emissions

Canada · CBAM embedded emissions · Default value, 2025 data

Each kilogram of these goods (country of production: Canada) carries a CBAM default of 1.33 kg CO₂e at the EU border. The law adds a mark-up to it for each declaration year.

Default value for goods made in Canada

1.33kgCO₂e/kg

Regulatory default · Fossil only · GWP100 · AR5

FossilBio CH₄Land useBio CO₂EN 15804 GWP-fossil

One value, valid from 1 January 2026

EU CBAM sets this validity and gives no value for another period, so there is no year to pick.

Reference year 2025

Country of production
Canada CA
Boundary
CBAM embedded emissions
Data quality
LowRated by us, not by the source
Licence
Open · CC BY 4.0
CN code
7318 12 90
Production route
(C) Carbon Steel based on BF/BOF

Where 1.33 comes from

Published as one number

EU CBAM prints this factor as a single figure, with no parts to add up and no split by gas.

Reporting this kilogram under the GHG Protocol

3.1 Goods we buy 1.33

You buy the goods as a material: everything CBAM counts up to the EU border is your category 1, purchased goods. It undercounts a cradle-to-gate footprint.

CiteAPI

The factor, standardised

Every factor on open-climate.ai answers the same questions in the same words, whatever the publisher. Open any ⓘ for the definition.

Manufactured goods › Other manufactured goods · Canada · per kg · Generic

CBAM embedded emissions · Fossil only · AR5

Boundary
CBAM embedded emissions
Raw materials, fuel combustion, manufacturing and purchased energy
GWP method
IPCC AR5, 100-year horizon
As printed by EU CBAM
CO₂e basis
Fossil onlyFossilBio CH₄Land useBio CO₂EN 15804 GWP-fossil
Not split by gas; CO₂e only
Life cycle
Upstream: not coveredProduction: partly coveredDownstream: not coveredEnd of life: not covered

Low quality · Open licence · Any year

What this number covers

Embedded emissions: what EU CBAM counts to make one kilogram of an imported good. Direct emissions, its precursors, and electricity where printed.

  1. Direct emissions1.33

    1. Precursors

      Emissions already in the inputs, made on site or bought in.

      Included
    2. Fuels and process materials

      CO₂ from the fuels burned at the plant and from process materials such as carbonates.

      Included
    3. Production process

      The process at the plant that makes the good.

      Included
  2. Electricity used

    Indirect, counted where the EU prints it. Here it prints N/A.

    Not printed
  3. At the EU border

    1 kg declared. The factor is per kg imported.

    = 1.33

Outside this boundary

  • Fuel supply chain
  • Transport to the plant
  • Transport to the border
  • Plant and equipment
  • Packaging
  • Use
  • End of life
  • Recycling credit

Gases

  • CO₂ · counted
  • N₂O · nitric acid and fertilisers only
  • PFCs · aluminium only
  • CH₄ · never

A mark-up is a policy value, not a measurement

Assigned

For 2026 to 2028 the law adds a mark-up to this default, to push importers towards the plant's own figure. It says nothing about how the good was made, so this page shows the default without it, never as a new year of data.

  • N/A in the indirect column means not printed, never zero.
  • The direct emissions are the whole total here, so no separate direct factor is served.
  • A regulatory default: not comparable with a GHG Protocol cradle-to-gate factor.

From EU CBAM's record to a comparable factor

EU CBAM publishes this factor as one record. Here is each field as printed and what open-climate.ai made of it.

About this factor

From the European Commission

The regulation's system boundaries

3.1. Cross-sectoral rules Specific embedded emissions shall be calculated as the emissions of the production process and, for complex goods, the embedded emissions of the precursors to produce the functional unit of the good during the reporting period. The system boundaries are defined per aggregated goods categories and cover the direct emissions, the indirect emissions from electricity consumption where relevant under Regulation (EU) 2023/956, emitted by all processes directly or indirectly linked to the production processes, and the embedded emissions of precursors, independently of whether these precursors are produced in the installation or acquired from a different installation. In addition to these general rules, the specific details of each aggregated goods category are set out in points 3.2 to 3.19. Any CBAM goods produced by means of a production route not listed in points 3.2 to 3.19 is subject to the cross-sectoral rules described in this point, and to the sector-specific rules if the production route is a combination of the production routes listed in in points 3.2 to 3.19. The purchase and maintenance of infrastructure and equipment are excluded from the system boundaries. When the production process of complex goods listed in Annex II to Regulation (EU) 2023/956 includes one or more precursors not listed in that Annex, the indirect emissions of those precursors will be included in the calculation of the embedded emissions of the complex goods. When the production process of complex goods not listed in that Annex includes one or more precursors listed in that Annex, the indirect emissions of these precursors will not be included in the calculation of the embedded emissions of the complex goods. 3.16. Iron or steel products 3.16.1. Special provisions None. 3.16.2. System boundary For iron or steel products, direct emissions monitoring shall take into account: — all processes directly or indirectly linked to the production processes emitting CO 2 emissions from combustion of fuels and process emissions from flue gas treatment, including re-heating, re-melting, casting, hot rolling, cold rolling, forging, annealing, coating, galvanizing, wire drawing, pickling and excluding the following processes: plating, cutting, welding and finishing of iron or steel products.

The European Commission gives no description for this value. It is a default value from Commission Implementing Regulation (EU) 2026/1740, Annexes I and IV.

Source and licence

Publisher
European Commission (DG TAXUD), Carbon Border Adjustment Mechanism
Published
6 August 2026
Valid from
1 January 2026
Open the record at EU CBAM

The values and their metadata are served in full and may be reused with credit to the publisher.

Credit it with this line© European Union, 1995-2026. Commission Implementing Regulation (EU) 2026/1740 of 20 July 2026, Annexes I and IV. Reuse authorised under Commission Decision 2011/833/EU (CC BY 4.0).
A plain reading of the licence, not legal advice. The licence text prevails.

Cite this factor

© European Union, 1995-2026. Commission Implementing Regulation (EU) 2026/1740 of 20 July 2026, Annexes I and IV. Reuse authorised under Commission Decision 2011/833/EU (CC BY 4.0). Normalised by open-climate.ai, https://open-climate.ai/factors/libraries/cbam/ (CC BY 4.0). https://open-climate.ai/factors/ef-cbam-wood_screws_of_iron_or-ca-kg-cbam_embedded-1ecf9af1/?v=efv1-378dfe4f0b9fa256514692d68bf25c33

Something looks wrong?

Tell us which value and why. We check it against the source and answer within a week.

Page data as of .