Emission factor from ÖKOBAUDAT OBD_2024_III EPD, industry average

EMpowerLED NM 1W 3H Basic Screw Fix

European Union (27) · Cradle to grave · Reference year 2025

Each unit of this product counts as 28.7 kg CO₂e over the modules its EPD declares: 26.8 in use (B6) and 1.84 for cradle to grave, embodied.

Value per unit, module B6 only

28.7kgCO₂e/unit

EN 15804 module B6 · Fossil only · GWP100 · AR5

FossilBio CH₄Land useBio CO₂EN 15804 GWP-fossil

Derived by open-climate.ai: the sum of ÖKOBAUDAT's published parts

The one scenario this EPD declaresReference year 2025

Region
European Union (27)
Boundary
Cradle to grave
Data quality
MediumRated by us, not by the source
Licence
Open · ÖKOBAUDAT terms
Declared by
Tridonic GmbH & CoKG

Where 28.7 comes from

Derived by open-climate.ai

Σ 28.7: the two declared modules add up to the total. D stays beside it.

Reporting this item under the GHG Protocol

This period

Scope 3, categories 1 and 4 1.84

This one figure covers both together; no split between them is given.

You buy the product for a building that is not yours. The product and its installation go to category 1, the delivery to category 4. The use stage belongs to the building owner; demolition waste you handle is category 5.

Later, when it happens

During use: the building owner reports it

  • B6 Not yours to report 26.8

At end of life, in the year of demolition

  • Cradle to grave, embodied 3.5 Waste 1.84

Outside the scopes, reported separately

  • D −0.351

A1-A3 to A5, B1 to B5, B7 and C1 to C4 are not declared: nothing to report.

CiteAPI

The factor, standardised

Every factor on open-climate.ai answers the same questions in the same words, whatever the publisher. Open any ⓘ for the definition.

Manufactured goods › Electrical equipment · European Union (27) · per item · Average

Cradle to grave · Fossil only · AR5

Boundary
Cradle to grave
Raw materials, inbound transport, fuel supply, fuel combustion, manufacturing, packaging, purchased energy, installation, outbound transport, use, maintenance and end of life
GWP method
IPCC AR5, 100-year horizon
Not on the record; set from ÖKOBAUDAT's method notes · impact method EF 3.0
CO₂e basis
Fossil onlyFossilBio CH₄Land useBio CO₂EN 15804 GWP-fossil
Split by carbon origin, not by gas
Life cycle
Upstream: coveredProduction: coveredDownstream: coveredEnd of life: covered

Medium quality · Open licence · Any year

Module by module, up to the total

Seventeen EN 15804 modules, always in the same order. Each declared one moves the running total. D sits below zero after the total, because it is reported beside it.

kgCO₂e per unit. Each bar starts where the one before ended. Pick a module to read it.
Product
Con­struc­tion
Use
B1 to B5not de­clared
B7not de­clared
End of life
Beyond the boundary

beside the total, not in it

What this number covers

Follow 1 unit of this product through EN 15804's stages. The total counts what the EPD declares; what it leaves out stays visible.

  1. A1-A3Product

    Materials and making the product

    Included1.75
  2. A4-A5Construction

    Delivery and installation

    Included0.00272
  3. B1-B7Use

    Energy in use only; B1 to B5, B7 not declared

    B6 only26.8
  4. C1-C4End of life

    From demolition to disposal

    Included0.0874
  5. DBeyond the boundary

    Recovery after end of life

    Not in the total−0.351

Outside this boundary

  • Retail
  • Recycling credit

The recycling credit is module D, shown beside the total.

Gases

  • Fossil CO₂e28.7
  • Biogenic CO₂e0.023
  • Land-use CO₂e0.00285

The total counts fossil CO₂e. ÖKOBAUDAT reports biogenic and land-use CO₂e separately; they are shown beside it, not added.

From ÖKOBAUDAT's record to a comparable factor

ÖKOBAUDAT publishes this EPD as one declared value. Each field as printed, and what open-climate.ai made of it.

The total and its modules

Use a module on its own when you report it in a different year or scope; never add one to the total.

You are here · the EPD total28.7
D beside−0.351
The two modules add up to the total; D stays beside it. Each opens its own page.

About this factor

From ÖKOBAUDAT

What it is

This data set has been modeled according to the European Standard EN 15804+A2 for Sustainable Building. Results are depicted in modules that allow the structured expression of results over the entire life cycle. Transport modul: A Standard scenario with a truck with a transport distance of 700 km in Europe is considered. The weight of the transported unit includes product with packaging. Use-stage modul: During the use-stage, consumption of electricity is calculated, based on a for the declared product characteristical, standardardised scenario. All use-scenarios are defined in the [PCR part B] of IBU. Not only annual operating time, average product lifetime and power consumption is considered but also additional influences like stand-by circuits, dimming function and more. The following electricity grid mix is applied by default: EU Allocation of waste material: For the treatment of production residues the calculation considers the increased demand of materials' input resulting in production residues during manufacturing. These material flows are not connected to an EoL-scenario. Avoided burdens for secondary material in case of potential recycling are not included. End-of-life modul: As an EoL scenario the product as well as the replacement parts are assumed to be collected to 100% (legal requirements defined within WEEE directive). The product and replacement parts are fed to a generic shredding process with fixed demand on electrical energy per input mass (C3) of 1,2 MJ/kg, resulting in different waste fractions. For the amount of metal flows respective recycling processes are considered, including recycling losses. Environmental burdens of recycling processes, as well as avoided burdens for secondary materials are assigned as total value in module D. The plastic fraction is fed into a process for waste incineration (B4/C3). The calculation of emissions from the waste incineration plant follows a partial stream consideration for the combustion process, according to an average mix of plastics.

What it includes

The manufacturing process includes production technologies such as plastic injection moulding, plastics processing, metalworking and powder coating, as well as the operation of highly automated systems for assembling the products. All primary and secondary data are modelled to be specific to the technologies or technology mixes under study. Where technology-specific data are unavailable, proxy data are used. Technological representativeness is considered to be good.

Where it applies

The declared product offers smart functionalities for LED-based luminaires. This dataset either represents a LED module for the provisioning of light or a LED control gear to controll LED lightsources.

Source and licence

Value
Summed by open-climate.ai from its parts
Publisher
ÖKOBAUDAT (BBSR / BMWSB)
Published
13 November 2026
Valid until
31 December 2030
See the source data at ÖKOBAUDAT

The values and their metadata are served in full and may be reused with credit to the publisher.

Credit it with this lineSource: ÖKOBAUDAT (OBD_2024_III), BBSR / BMWSB. Individual EPDs © their respective programme operators / declaration owners.
A plain reading of the licence, not legal advice. The licence text prevails.

Cite this factor

Source: ÖKOBAUDAT (OBD_2024_III), BBSR / BMWSB. Individual EPDs © their respective programme operators / declaration owners. Normalised by open-climate.ai, https://open-climate.ai/factors/libraries/okobaudat/ (CC BY 4.0). https://open-climate.ai/factors/ef-okobaudat-empowerled_nm_1w_3h-eu27-unit-cradle_to_grave-4b2763df/?v=efv1-b2598baa899ffc0402b50a4e38ae22ba

Something looks wrong?

Tell us which value and why. We check it against the source and answer within a week.

Page data as of .