Emission factor from ÖKOBAUDAT OBD_2024_III Generic data

End of life stoneware pipe

Germany · End of life · Any year

Each kilogram of this waste sent to landfill counts as 0.0217 kg CO₂e: 0.00673 for transport to waste processing and 0.015 for disposal.

Value per kilogram, over the modules the dataset declares

0.0217kgCO₂e/kg

EN 15804 modules C2 to C4 · Fossil only · GWP100 · AR6

FossilBio CH₄Land useBio CO₂EN 15804 GWP-fossil

Derived by open-climate.ai: the sum of ÖKOBAUDAT's published parts

The one scenario this EPD declaresReference year 2023

Region
Germany DE
Boundary
End of life
Data quality
MediumRated by us, not by the source
Licence
Open · ÖKOBAUDAT terms

Where 0.0217 comes from

Derived by open-climate.ai

Σ 0.0217: the two declared modules add up to the total.

Reporting this kilogram under the GHG Protocol

3.5 Waste 0.0217

Paying for your own waste to be treated is category 5, waste generated in operations, counted in the period you send it.

A1-A3 to A5, B1 to B7, C1 and C3 are not declared: nothing to report.

CiteAPI

The factor, standardised

Every factor on open-climate.ai answers the same questions in the same words, whatever the publisher. Open any ⓘ for the definition.

Waste treatment › Landfill · Germany · per kg · Generic

End of life · Fossil only · AR6

Boundary
End of life
GWP method
IPCC AR6, 100-year horizon
Not on the record; set from ÖKOBAUDAT's method notes · impact method EF 3.1
CO₂e basis
Fossil onlyFossilBio CH₄Land useBio CO₂EN 15804 GWP-fossil
Split by carbon origin, not by gas
Life cycle
Upstream: not coveredProduction: not coveredDownstream: not coveredEnd of life: partly covered

Medium quality · Open licence · Any year

Module by module, up to the total

Seventeen EN 15804 modules, always in the same order. Each declared one moves the running total.

kgCO₂e per kilogram. Each bar starts where the one before ended. Pick a module to read it.
Product
A1-A3not de­clared
Con­struc­tion
A4 to A5not de­clared
Use
B1 to B7not de­clared
End of life
C1not de­clared
C3not de­clared
Beyond the boundary
Dnot de­clared

What this number covers

Follow one kilogram of this product through EN 15804's stages. The total counts what the EPD declares; what it leaves out stays visible.

  1. A1-A3Product

    Materials and making the product

    Not declared
  2. A4-A5Construction

    Delivery and installation

    Not declared
  3. B1-B7Use

    The product in service: maintenance, repair, replacement and the energy and water it uses

    Not declared
  4. C1-C4End of life

    From demolition to disposal; C1, C3 not declared

    C2, C40.0217
  5. DBeyond the boundary

    Recovery after end of life

    Not declared

Outside this boundary

  • Raw materials
  • Manufacturing
  • Secondary material reprocessing
  • Recycling credit

Gases

  • Fossil CO₂e0.0217
  • Biogenic CO₂e−0.000298
  • Land-use CO₂e0.000217

The total counts fossil CO₂e. ÖKOBAUDAT reports biogenic and land-use CO₂e separately; they are shown beside it, not added.

From ÖKOBAUDAT's record to a comparable factor

ÖKOBAUDAT publishes this EPD with one value per module. Each field as printed, and what open-climate.ai made of it.

The total and its modules

Use a module on its own when you report it in a different year or scope; never add one to the total.

You are here · the EPD total0.0217
The two modules add up to the total. Each opens its own page.

About this factor

From ÖKOBAUDAT

What it is

This data set has been modeled according to the European Standard EN 15804+A2 for Sustainable Building. Results are depicted in modules that allow the structured expression of results over the entire life cycle.

What it includes

It is expected, that the recycling quote of big appliances like boilers, air conditioning, and ventilation systems is 95%. For pipes or cables which are often flush-mounted a 90% recycling quote is expected. The quotes are only related to metals and plastics. For mineral materials like mineral wool, concrete or ceramics inert landfilling is assumed, as well as for 5-10% of metals and plastics (e.g. cable waste and pipe pieces) that are not recycled. Plastics that are not recycled are introduced to the municipal waste incineration. For the MWI a German model with average emission values and energy production rates was used. Depending on the incinerated type of plastic, different processes with corresponding elemental compositions were used. Power and thermal energy produced in the MWI are accounted to the German power- and thermal energy mix. The credits for the metal recycling and the energetic recovery of plastics, as well as the emission and resource consumptions (energy for re-melting, incineration emissions, landfilling) are included in the datasets. Iron materials (steel sheet, pipes, grey cast iron) already use a share of steel scrap at the production. These values are deducted from the recycled steel material before introduced to the melting to avoid a overvaluation of the credits. For the credits primary steel was used. Credits for the recycling of rare earth or mercury emissions from fluorescent lamps are not considered due to a lack of information. The assumed transport distance from building to recycling plant/landfilling site or MWI are 50km using a truck. The assumed distance to the steel, copper, and aluminium plant is 200km by train. Background system: Electricity: Electricity is modelled according to the individual country-specific situations. The country-specific modelling is achieved on multiple levels. Firstly, individual energy carrier specific power plants and plants for renewable energy sources are modelled according to the current national electricity grid mix. Modelling the electricity consumption mix includes transmission / distribution losses and the own use by energy producers (own consumption of power plants and "other" own consumption e.g. due to pumped storage hydro power etc.), as well as imported electricity. Secondly, the national emission and efficiency standards of the power plants are modelled as well as the share of electricity plants and combined heat and power plants (CHP). Thirdly, the country-specific energy carrier supply (share of imports and / or domestic supply) including the country-specific energy carrier properties (e.g. element and energy content) are accounted for. Fourthly, the exploration, mining/production, processing and transport processes of the energy carrier supply chains are modelled according to the specific situation of each electricity producing country. The different production and processing techniques (emissions and efficiencies) in the different energy producing countries are considered, e.g. different crude oil production technologies or different flaring rates at the oil platforms. Thermal energy, process steam: The thermal energy and process steam supply is modelled according to the individual country-specific situation with regard to emission standards and considered energy carriers. The thermal energy and process steam are produced at heat plants. Efficiencies for thermal energy production are by definition 100% in relation to the corresponding energy carrier input. For process steam the efficiency ranges from 85%, 90% to 95%. The energy carriers used for the generation of thermal energy and process steam are modelled according to the specific import situation (see electricity above). Transports: All relevant and known transport processes are included. Ocean-going and inland ship transport as well as rail, truck and pipeline transport of bulk commodities are considered. Energy carriers: The energy carriers are modelled according to the specific supply situation (see electricity above). Refinery products: Diesel fuel, gasoline, technical gases, fuel oils, lubricants and residues such as bitumen are modelled with a parameterised country-specific refinery model. The refinery model represents the current national standard in refining techniques (e.g. emission level, internal energy consumption, etc.) as well as the individual country-specific product output spectrum, which can be quite different from country to country. The supply of crude oil is modelled, again, according to the country-specific situation with the respective properties of the resources.

Where it applies

This product can be used in construction.

Source and licence

Value
Summed by open-climate.ai from its parts
Publisher
ÖKOBAUDAT (BBSR / BMWSB)
Published
13 November 2026
Valid until
31 December 2026
See the source data at ÖKOBAUDAT

The values and their metadata are served in full and may be reused with credit to the publisher.

Credit it with this lineSource: ÖKOBAUDAT (OBD_2024_III), BBSR / BMWSB. Individual EPDs © their respective programme operators / declaration owners.
A plain reading of the licence, not legal advice. The licence text prevails.

Cite this factor

Source: ÖKOBAUDAT (OBD_2024_III), BBSR / BMWSB. Individual EPDs © their respective programme operators / declaration owners. Normalised by open-climate.ai, https://open-climate.ai/factors/libraries/okobaudat/ (CC BY 4.0). https://open-climate.ai/factors/ef-okobaudat-end_of_life_stoneware-de-kg-end_of_life-9aec3982/?v=efv1-60631bb2a3b0a7b912b94e605674c7bb

Something looks wrong?

Tell us which value and why. We check it against the source and answer within a week.

Page data as of .