Emission factor from ÖKOBAUDAT OBD_2024_III EPD, product-specific
Heradesign Fine Alpha+ 15 mm
Austria · EPD total · Reference year 2024
Each square metre of this product counts as 3.84 kg CO₂e over the modules its EPD declares: 3.69 to make it (A1–A3) and 0.147 at end of life.
Value per square metre, over the modules the EPD declares
3.84kgCO₂e/m²
EN 15804 modules A1 to A3 · Fossil only · GWP100 · AR5
FossilBio CH₄Land useBio CO₂EN 15804 GWP-fossilDerived by open-climate.ai: the sum of ÖKOBAUDAT's published parts
The one scenario this EPD declaresReference year 2024
- Region
- Austria AT
- Boundary
- EPD total
- Data quality
- HighRated by us, not by the source
- Licence
- Open · ÖKOBAUDAT terms
- Declared by
- Knauf Ceiling Solutions GmbH & Co. KG
Where 3.84 comes from
- A1-A3 Product stage3.1 Goods we buy3.6996.2%
- End of lifeDerived by open-climate.ai3.5 Waste0.1473.8%
Σ 3.84: the two declared modules add up to the total.
Reporting this square metre under the GHG Protocol
This period
3.1 Goods we buy 3.69
You buy the product for a building that is not yours. The product and its installation go to category 1, the delivery to category 4. The use stage belongs to the building owner; demolition waste you handle is category 5.
Later, when it happens
At end of life, in the year of demolition
- End of life 3.5 Waste 0.147
A4, A5, B1 to B7 and C1 to C4 are not declared: nothing to report.
The factor, standardised
Every factor on open-climate.ai answers the same questions in the same words, whatever the publisher. Open any ⓘ for the definition.
Materials › Paper and wood · Austria · per m² · Supplier-specific
EPD total · Fossil only · AR5
- BoundaryEPD totalThe sum of every EN 15804 module an EPD declares, when that set is not the complete A-C grid (MOD-0034). Learn more
- EPD total
- Raw materials, inbound transport, fuel supply, fuel combustion, manufacturing, packaging, purchased energy and end of life
- GWP methodWhich IPCC assessment report's warming potentials convert each gas to CO₂e, and over how many years the warming is counted (GWP100: 100 years). Learn more
- IPCC AR5, 100-year horizon
- Not on the record; set from ÖKOBAUDAT's method notes · impact method EF 3.0
- CO₂e basisWhich carbon the CO₂e counts. Fossil only leaves out biogenic methane, land-use change and biogenic CO₂; excl. biogenic CO₂ counts biogenic methane but not the other two; net total counts every pool, net of removals. The same activity on two bases is two different numbers. Learn more
- Fossil onlyFossilBio CH₄Land useBio CO₂EN 15804 GWP-fossil
- Split by carbon origin, not by gas
- Life cycle
- Upstream: coveredProduction: coveredDownstream: not coveredEnd of life: partly covered
High quality · Open licence · Any year
Module by module, up to the total
Seventeen EN 15804 modules, always in the same order. Each declared one moves the running total.
| Module | Name | Per square metre | Running total | Status |
|---|---|---|---|---|
| A1-A3 | Product stage | 3.69 | 3.69 | Declared |
| A4 | Transport to site | not declared | 3.69 | Not declared |
| A5 | Installation | not declared | 3.69 | Not declared |
| B1 | Use | not declared | 3.69 | Not declared |
| B2 | Maintenance | not declared | 3.69 | Not declared |
| B3 | Repair | not declared | 3.69 | Not declared |
| B4 | Replacement | not declared | 3.69 | Not declared |
| B5 | Refurbishment | not declared | 3.69 | Not declared |
| B6 | Energy in use | not declared | 3.69 | Not declared |
| B7 | Water in use | not declared | 3.69 | Not declared |
| C1 | Demolition | not declared | 3.69 | Not declared |
| C2 | Waste transport | 0.0247 | 3.7147 | Declared |
| C3 | Waste processing | not declared | 3.7147 | Not declared |
| C4 | Disposal | 0.122 | 3.8367 | Declared |
| Total | EPD total, declared modules | 3.8367 | Sum of the declared modules | |
| D | Beyond the system boundary | not declared | not added | Not declared |
What this number covers
Follow one square metre of this product through EN 15804's stages. The total counts what the EPD declares; what it leaves out stays visible.
A1-A3Product
Materials and making the product
Included3.69A4-A5Construction
Delivery and installation
Not declaredB1-B7Use
The product in service: maintenance, repair, replacement and the energy and water it uses
Not declaredC1-C4End of life
From demolition to disposal; C1, C3 not declared
C2, C40.147DBeyond the boundary
Recovery after end of life
Not declared
Outside this boundary
- Installation
- Maintenance
- Outbound transport
- Retail
- Use phase
- Recycling credit
Maintenance is out because B2 is not declared.
Gases
- Fossil CO₂e3.84
- Land-use CO₂e0.00142
The total counts fossil CO₂e. ÖKOBAUDAT reports land-use CO₂e separately; it is shown beside it, not added.
From ÖKOBAUDAT's record to a comparable factor
ÖKOBAUDAT publishes this EPD as one declared value. Each field as printed, and what open-climate.ai made of it.
The total and its modules
Use a module on its own when you report it in a different year or scope; never add one to the total.
About this factor
From ÖKOBAUDAT
What it is
Heradesign panels are wood wool panels in accordance with EN 13168 and/or EN 13964, manufactured from wood wool and mineral binding agents. Product name: HERADESIGN Fine Alpha+ 15mmWhat it includes
2.6.1 Raw material Spruce wood is stored as trunks 2 metres in length. Depending on climate conditions, storage lasts around 6-12 months. The trunks are transported by conveyor belts to a multi-rip saw, cut into pieces and processed as wood wool using a planing machine. The binding agent components are stored in steel silos. 2.6.2 Mixer Wood wool, as well as a binding agent and a magnesium sulphate solution, are required for generating a mixture for wood wool pellets. These components are transported to a mixer where they are processed to form the requisite formula. 2.6.3 Scattering and shaping The mixture is scattered onto a steel band and passed through a binding channel, whereby it is separated from the room by a second horizontal steel strip as well as two side strips. An endless product is produced on leaving the twin belt. The raw goods are then cut to the desired length. 2.6.4 Interim storage and picking The products are put into interim storage for 3-5 days (drying and maturing process). The requisite edge design is then produced on so-called double-end profiling machines. Edge processing: 18 standard edges are possible. 2.6.5 Dyeing, packaging and shipping The requisite colour is applied in a dyeing plant, followed by packaging and storage. Dyeing: Possible in many RAL colours (left) Products ready for storage (right) Technical data: Product-specific values can be found at http://www.knaufceilingsolutions.com Declared unit: This EPD refers to a declared unit of 1 m of Heradesign Fine Alpha+ 15 mm (Euroclass B). The declared unit refers to a surface weight of 8.2 kg/m.Where it applies
Heradesign acoustic panels are primarily used as acoustic/decorative wall and ceiling panelling in offices, kindergartens etc.Source and licence
- Value
- Summed by open-climate.ai from its parts
- Publisher
- ÖKOBAUDAT (BBSR / BMWSB)
- Library
- ÖKOBAUDAT OBD_2024_III
- Published
- 13 November 2026
- Valid until
- 31 December 2029
The values and their metadata are served in full and may be reused with credit to the publisher.
Cite this factor
Source: ÖKOBAUDAT (OBD_2024_III), BBSR / BMWSB. Individual EPDs © their respective programme operators / declaration owners. Normalised by open-climate.ai, https://open-climate.ai/factors/libraries/okobaudat/ (CC BY 4.0). https://open-climate.ai/factors/ef-okobaudat-heradesign_fine_alpha_15-at-m2-epd_total-f6f9859b/?v=efv1-b92871e1d38dbd4cd51b2fbbe626f153
Something looks wrong?
Tell us which value and why. We check it against the source and answer within a week.
Page data as of .