Emission factor from ÖKOBAUDAT OBD_2024_III Generic data

Transparent board PMMA, cast

Germany · EPD total · Any year

Value per litre, over the modules the dataset declares

9.2kgCO₂e/L

EN 15804 modules A1 to C3 · Fossil only · GWP100 · AR6

FossilBio CH₄Land useBio CO₂EN 15804 GWP-fossil

Derived by open-climate.ai: the sum of ÖKOBAUDAT's published parts

The one scenario this EPD declaresReference year 2023

Region
Germany DE
Boundary
EPD total
Data quality
MediumRated by us, not by the source
Licence
Open · ÖKOBAUDAT terms
Declared unit
Served per litre ÷ 1,000

Where 9.2 comes from

Derived by open-climate.ai

Σ 9.2: the three declared modules add up to the total. D stays beside it.

Reporting this litre under the GHG Protocol

This period

3.1 Goods we buy 6.31

You buy the product for a building that is not yours. The product and its installation go to category 1, the delivery to category 4. The use stage belongs to the building owner; demolition waste you handle is category 5.

Later, when it happens

At end of life, in the year of demolition

  • C2 3.5 Waste 0.00396
  • C3 3.5 Waste 2.89

Outside the scopes, reported separately

  • D −1.01

A4, A5, B1 to B7, C1 and C4 are not declared: nothing to report.

CiteAPI

The factor, standardised

Every factor on open-climate.ai answers the same questions in the same words, whatever the publisher. Open any ⓘ for the definition.

Materials › Polymers and rubber · Germany · per L · Generic

EPD total · Fossil only · AR6

Boundary
EPD total
Raw materials, inbound transport, fuel supply, fuel combustion, manufacturing, packaging, purchased energy and end of life
GWP method
IPCC AR6, 100-year horizon
Not on the record; set from ÖKOBAUDAT's method notes · impact method EF 3.1
CO₂e basis
Fossil onlyFossilBio CH₄Land useBio CO₂EN 15804 GWP-fossil
Split by carbon origin, not by gas
Life cycle
Upstream: coveredProduction: coveredDownstream: not coveredEnd of life: partly covered

Medium quality · Open licence · Any year

Module by module, up to the total

Seventeen EN 15804 modules, always in the same order. Each declared one moves the running total. D sits below zero after the total, because it is reported beside it.

kgCO₂e per litre. Each bar starts where the one before ended. Pick a module to read it.
Product
Con­struc­tion
A4 to A5not de­clared
Use
B1 to B7not de­clared
End of life
C1not de­clared
C4not de­clared
Beyond the boundary

beside the total, not in it

Scenarios and units

Some EPDs price a module under several scenarios, such as different end-of-life routes. Each gets a tab, and each module's default is marked.

This factor

One scenario, as declared

Every module has one value, so there is nothing to choose.

  • Per m³, as declared9,198
  • Per litre, served9.198

What this number covers

Follow one litre of this product through EN 15804's stages. The total counts what the EPD declares; what it leaves out stays visible.

  1. A1-A3Product

    Materials and making the product

    Included6.31
  2. A4-A5Construction

    Delivery and installation

    Not declared
  3. B1-B7Use

    The product in service: maintenance, repair, replacement and the energy and water it uses

    Not declared
  4. C1-C4End of life

    Waste transport and waste processing; C1, C4 not declared

    C2, C32.89
  5. DBeyond the boundary

    Recovery after end of life

    Not in the total−1.01

Outside this boundary

  • Installation
  • Maintenance
  • Outbound transport
  • Retail
  • Use phase
  • Recycling credit

Maintenance is out because B2 is not declared. The recycling credit is module D, shown beside the total.

Gases

  • Fossil CO₂e9.2
  • Biogenic CO₂e0.0616
  • Land-use CO₂e0.00166

The total counts fossil CO₂e. ÖKOBAUDAT reports biogenic and land-use CO₂e separately; they are shown beside it, not added.

From ÖKOBAUDAT's record to a comparable factor

ÖKOBAUDAT publishes this EPD with one value per module. Each field as printed, and what open-climate.ai made of it.

The total and its modules

Use a module on its own when you report it in a different year or scope; never add one to the total.

You are here · the EPD total9.2
D beside−1.01
The three modules add up to the total; D stays beside it. Each opens its own page.

About this factor

From ÖKOBAUDAT

What it is

This data set has been modeled according to the European Standard EN 15804+A2 for Sustainable Building. Results are depicted in modules that allow the structured expression of results over the entire life cycle.

What it includes

The LCA of transparent panels on a polymethyl methacrylate basis covers the cradle-to-gate phase, that is, mainly an injection moulding process using PMMA granulate. The percentage of the softening agent is 10%. The system boundaries are represented by the finished product with a density of 1.19g/cm3 and a thickness between 1-25mm. Transports from the factory to the point of installation are not considered and must be included according to the system boundaries. In module C1, a manual dismantling (no loads) is assumed, collecting losses are neglected. The transport in module C2 to the recycling plant takes place with a truck (50km). Module C3 takes into account the grinding and thermal treatment (combustion) of the material. When calculating combustion emissions and credits, the specific calorific value of each material and the material composition are taken into account. In module D credits for the substitution of electricity (German electricity mix) and thermal energy (from natural gas) are given.
Show ÖKOBAUDAT's original (German)
Die Lebenszyklusanalyse der transparenten Platten auf Polymethylmethacrylat-Basis umfasst die Lebenswegabschnitte Herstellung und Entsorgung. Es wurde ein Spritzgussprozess unter Verwendung von PMMA-Granulat modelliert. Der Weichmacher-Anteil beträgt 10%. Das fertige Produkt hat eine Dichte von 1,19g/cm3. Plattenstärken zwischen 1-25mm sind üblich. Transporte vom Werk zum Einbauort sind nicht berücksichtigt und müssen bei Systembetrachtungen eingerechnet werden. In Modul C1 wird ein manueller Rückbau (lastenfrei) angenommen. Sammelverluste werden vernachlässigt. Der Transport in Modul C2 zur Verwertungsanlage erfolgt mit einem LKW (50km). In Modul C3 wird die Zerkleinerung und thermische Behandlung (Verbrennung) des Materials berücksichtigt. Bei der Berechnung der Verbrennungsemissionen und Gutschriften wird der spezifische Heizwert des jeweiligen Materials sowie die Materialzusammensetzung berücksichtigt. In Modul D erfolgen Gutschriften für die Substitution von Strom (deutscher Strommix) und thermischer Energie (aus Erdgas).

Where it applies

This product can be used in construction.

Source and licence

Value
Summed by open-climate.ai from its parts
Publisher
ÖKOBAUDAT (BBSR / BMWSB)
Published
13 November 2026
Valid until
31 December 2026
See the source data at ÖKOBAUDAT

The values and their metadata are served in full and may be reused with credit to the publisher.

Credit it with this lineSource: ÖKOBAUDAT (OBD_2024_III), BBSR / BMWSB. Individual EPDs © their respective programme operators / declaration owners.
The publisher's text on this page is translated by open-climate.ai.A plain reading of the licence, not legal advice. The licence text prevails.

Cite this factor

Source: ÖKOBAUDAT (OBD_2024_III), BBSR / BMWSB. Individual EPDs © their respective programme operators / declaration owners. Normalised by open-climate.ai, https://open-climate.ai/factors/libraries/okobaudat/ (CC BY 4.0). https://open-climate.ai/factors/ef-okobaudat-transparent_board_pmma-de-l-epd_total-7f962291/?v=efv1-abc7e2c9396ff963599520cdce5a8de6

Something looks wrong?

Tell us which value and why. We check it against the source and answer within a week.

Page data as of .