Emission factor from ÖKOBAUDAT OBD_2024_III

Wood pellets (6,2% moisture / 5,8% H2O content)

Germany · Upstream fuel · Any year

Each kilogram of this fuel counts as 0.107 kg CO₂e for producing it and bringing it to you. ÖKOBAUDAT gives one figure, for use in any year.

Value for any year

0.107kgCO₂e/kg

Fossil only · GWP100 · AR6

FossilBio CH₄Land useBio CO₂EN 15804 GWP-fossil

One value, valid until 31 December 2026

ÖKOBAUDAT sets this validity and gives no value for another period, so there is no year to pick.

Reference year 2023

Region
Germany DE
Boundary
Upstream fuel
Data quality
MediumRated by us, not by the source
Licence
Open · ÖKOBAUDAT terms

Where 0.107 comes from

Published as one number

ÖKOBAUDAT prints this factor as a single figure, with no parts to add up.

Reporting this kilogram under the GHG Protocol

3.3 Energy upstream 0.107

Supplying the fuel is Scope 3, category 3 for whoever burns it.

CiteAPI

The factor, standardised

Every factor on open-climate.ai answers the same questions in the same words, whatever the publisher. Open any ⓘ for the definition.

Fuels › Biofuels · Germany · per kg · Generic

Upstream fuel · Fossil only · AR6

Boundary
Upstream fuel
Fuel supply
GWP method
IPCC AR6, 100-year horizon
Not on the record; set from ÖKOBAUDAT's method notes · impact method EF 3.1
CO₂e basis
Fossil onlyFossilBio CH₄Land useBio CO₂EN 15804 GWP-fossil
Split by carbon origin, not by gas

Medium quality · Open licence · Any year

What this number covers

The path of one kilogram of this fuel, from the wood it is made from to your boiler.

  1. Fuel supply0.107

    1. Harvest or collection

      Felling trees or collecting waste wood

    2. Preparation

      Chipping, drying or pressing it into pellets

    3. Transport

      Moving it to your site

  2. Your record

    1 kg in your records. The factor is per kg.

= 0.107 per kg

Outside this boundary

  • Fuel combustion
  • Making the boiler that burns it
  • Building the pipelines and the network

ÖKOBAUDAT counts the fuel, not the things built to extract, move and burn it.

Gases

  • Fossil CO₂e0.107
  • Biogenic CO₂e−1.75
  • Land-use CO₂e0.000173

The total counts fossil CO₂e. ÖKOBAUDAT reports biogenic and land-use CO₂e separately; they are shown beside it, not added.

From ÖKOBAUDAT's record to a comparable factor

ÖKOBAUDAT publishes this factor as one German record. Here is each field as printed and what open-climate.ai made of it.

About this factor

From ÖKOBAUDAT

What it is

This data set has been modeled according to the European Standard EN 15804+A2 for Sustainable Building. Results are depicted in modules that allow the structured expression of results over the entire life cycle.

What it includes

The dataset refers to the production of 1 kg wood pellets with 6.2% of humidity. The expenditure for drying of pellets and the pelletisation have been particularly considered. Saw dust serves as input. The electricity demand is included in the dataset. Thermal energy is provided by an energy mix of light fuel oil and energy of thermal recycling/recoverage of wood residues. Transports to the user are not considered in the dataset and have to be added accordingly. Background system: Electricity: Electricity is modelled according to the individual country-specific situations. The country-specific modelling is achieved on multiple levels. Firstly, individual energy carrier specific power plants and plants for renewable energy sources are modelled according to the current national electricity grid mix. Modelling the electricity consumption mix includes transmission / distribution losses and the own use by energy producers (own consumption of power plants and "other" own consumption e.g. due to pumped storage hydro power etc.), as well as imported electricity. Secondly, the national emission and efficiency standards of the power plants are modelled as well as the share of electricity plants and combined heat and power plants (CHP). Thirdly, the country-specific energy carrier supply (share of imports and / or domestic supply) including the country-specific energy carrier properties (e.g. element and energy content) are accounted for. Fourthly, the exploration, mining/production, processing and transport processes of the energy carrier supply chains are modelled according to the specific situation of each electricity producing country. The different production and processing techniques (emissions and efficiencies) in the different energy producing countries are considered, e.g. different crude oil production technologies or different flaring rates at the oil platforms. Thermal energy, process steam: The thermal energy and process steam supply is modelled according to the individual country-specific situation with regard to emission standards and considered energy carriers. The thermal energy and process steam are produced at heat plants. Efficiencies for thermal energy production are by definition 100% in relation to the corresponding energy carrier input. For process steam the efficiency ranges from 85%, 90% to 95%. The energy carriers used for the generation of thermal energy and process steam are modelled according to the specific import situation (see electricity above). Transports: All relevant and known transport processes are included. Ocean-going and inland ship transport as well as rail, truck and pipeline transport of bulk commodities are considered. Energy carriers: The energy carriers are modelled according to the specific supply situation (see electricity above). Refinery products: Diesel fuel, gasoline, technical gases, fuel oils, lubricants and residues such as bitumen are modelled with a parameterised country-specific refinery model. The refinery model represents the current national standard in refining techniques (e.g. emission level, internal energy consumption, etc.) as well as the individual country-specific product output spectrum, which can be quite different from country to country. The supply of crude oil is modelled, again, according to the country-specific situation with the respective properties of the resources.

Where it applies

This product can be used in construction.

Source and licence

Publisher
ÖKOBAUDAT (BBSR / BMWSB)
Record
affbc7c9-976e-4b53-8d62-60984752efee · process UUID
Published
13 November 2026
Valid until
31 December 2026
Status
Generic dataset
Open the record at ÖKOBAUDAT

The values and their metadata are served in full and may be reused with credit to the publisher.

Credit it with this lineSource: ÖKOBAUDAT (OBD_2024_III), BBSR / BMWSB. Individual EPDs © their respective programme operators / declaration owners.
A plain reading of the licence, not legal advice. The licence text prevails.

Cite this factor

Source: ÖKOBAUDAT (OBD_2024_III), BBSR / BMWSB. Individual EPDs © their respective programme operators / declaration owners. Normalised by open-climate.ai, https://open-climate.ai/factors/libraries/okobaudat/ (CC BY 4.0). https://open-climate.ai/factors/ef-okobaudat-wood_pellets_62_moisture-de-kg-b6-330e3f95/?v=efv1-cb3ad1780be81951c5686d7735f518cd

Something looks wrong?

Tell us which value and why. We check it against the source and answer within a week.

Page data as of .