Facteur d'émission publié dans EPD Ireland EPD, spécifique au produit

ProAir Heat Recovery Ventilation Unit: ProAir PA600LI/PA600PLI

Irlande · Du berceau à la tombe · Année de référence 2022

Chaque unité de ce produit correspond à 4 139 kg CO₂e sur les modules que déclare son EPD : 3 114 en phase d'utilisation (B4, B6) et 1 025 (du berceau à la tombe, intrinsèque).

Valeur par unité, sur les modules que déclare l'EPD

4 139kgCO₂e/unité

Modules EN 15804 B4 à B6 · Fossile uniquement · PRG100 · AR5

Calculée par open-climate.ai : la somme des parties publiées par EPD Ireland

Le seul scénario que déclare cette EPDAnnée de référence 2022

Région
Irlande IE
Périmètre
Du berceau à la tombe
Qualité des données
ÉlevéeNoté par nous, pas par la source
Licence
Ouverte · Conditions d'EPD Ireland
Déclarant
ProAir Heat Recovery Ventilation Systems Ltd. T/A ProAir Systems

Le détail de 4 139

Calculée par open-climate.ai

Σ 4 139 : les trois modules déclarés redonnent le total. D figure à côté, hors total.

Comptabiliser cet article selon le GHG Protocol

Sur cette période

Scope 3, catégories 2 et 4 1 025

Ce chiffre unique couvre les deux postes à la fois ; sa répartition entre eux n'est pas fournie.

Le produit s'intègre à un bâtiment qui vous appartient. Le produit et sa mise en œuvre relèvent de la catégorie 2 l'année de l'achat, la livraison de la catégorie 4. L'utilisation et la fin de vie se déclarent les années où elles ont lieu.

Plus tard, le moment venu

Pendant l'utilisation, les années où le bâtiment est debout

  • B4 Scope 3, catégorie 2 41,4
  • B6 Scope 1 Scope 2 Scope 3, catégorie 3 3 073

En fin de vie, l'année de la démolition

  • Du berceau à la tombe, intrinsèque Scope 3, catégorie 5 1 025

Hors scopes, à déclarer à part

  • D −257

Les modules A1-A3 à A5, B1 à B3, B5, B7 et C1 à C4 ne sont pas déclarés : rien à comptabiliser.

CiterAPI

Le facteur, standardisé

Sur open-climate.ai, chaque facteur répond aux mêmes questions, dans les mêmes termes, quel que soit l'éditeur. Ouvrez un ⓘ pour lire la définition.

Biens manufacturés › Machines · Irlande · par pièce · Spécifique au fournisseur

Du berceau à la tombe · Fossile uniquement · AR5

Périmètre
Du berceau à la tombe
Matières premières, transport amont, approvisionnement en combustible, combustion, fabrication, emballage, énergie achetée, installation, transport aval, utilisation, entretien et fin de vie
Méthode PRG
GIEC AR5, horizon de 100 ans
Absente de la fiche ; fixée d'après les notes de méthode publiées par EPD Ireland · méthode d'impact EF 3.0
Base CO₂e
Fossile uniquement
Détail par origine du carbone, pas par gaz
Cycle de vie
Amont : couverture complèteProduction : couverture complèteAval : couverture complèteFin de vie : couverture complète

Qualité élevée · Licence ouverte · Quelle que soit l'année

Module par module, jusqu'au total

Dix-sept modules de la norme EN 15804, toujours dans le même ordre. Chaque module déclaré fait bouger le cumul. D se place sous zéro, après le total, car il est déclaré à côté de lui.

kgCO₂e par unité. Chaque barre part de là où la précédente s'arrête. Choisissez un module pour le lire.
Production
Mise en œuvre
Utilisation
B1 à B3non décla­ré
B5non décla­ré
B7non décla­ré
Fin de vie
C1non décla­ré
Au-delà du périmètre

à côté du total, pas dedans

Ce que couvre ce chiffre

Le parcours de 1 unité de ce produit à travers les étapes de la norme EN 15804. Le total compte ce que la déclaration environnementale déclare ; ce qu'elle laisse de côté reste visible.

  1. A1-A3Production

    Les matières et la fabrication du produit

    Inclus265
  2. A4-A5Mise en œuvre

    La livraison sur le chantier et la pose

    Inclus747
  3. B1-B7Utilisation

    Le produit en service : entretien, réparation, remplacement, ainsi que l'énergie et l'eau qu'il consomme ; non déclarés : B1 à B3, B5, B7

    B4, B63 114
  4. C1-C4Fin de vie

    Transport, traitement des déchets et élimination ; non déclarés : C1

    C2 à C413,6
  5. DAu-delà du périmètre

    La valorisation après la fin de vie

    Hors du total−257

Hors de ce périmètre

  • Vente au détail
  • Crédit de recyclage

Le crédit de recyclage correspond au module D, affiché à côté du total.

Gaz

  • CO₂e fossile4 139
  • CO₂e biogénique40,6
  • CO₂e lié à l'usage des sols4,75

Le total compte le CO₂e fossile. EPD Ireland publie à part le CO₂e biogénique et celui lié à l'usage des sols ; ils sont affichés à côté, sans être additionnés.

De la fiche publiée par EPD Ireland à un facteur comparable

EPD Ireland publie cette EPD avec une valeur par module. Chaque champ tel que publié, et ce qu'open-climate.ai en a fait.

Le total et ses modules

Prenez un module seul si vous le déclarez sur une autre année ou dans un autre scope ; ne l'ajoutez jamais au total.

Les trois modules s'additionnent pour former le total ; D reste à part. Chacun ouvre sa propre page.

À propos de ce facteur

Texte publié par EPD Ireland

Description

En anglais
The dataset is representative for the production processes used in 2021. The data Quality Level, according to Table E.1 of EN 15804:2012+A2:2019, Annex E, is as follows: • Geographical representativeness: Very Good • Technical representativeness: Good • Time representativeness: Very Good Allocation of energy and electricity types and amounts to the various manufacturing processes has been provided by the manufacturers along with production waste. Allocation of impacts to the products is based on the product composition mass. Flows related to human activities such as employee transport are excluded. The construction of capital assets such as buildings, manufacture of machines and transportation systems are also excluded since the related flows are assumed to be negligible compared to the manufacture of the building material when compared to these systems over a full lifetime of operation. The cut-off criteria of section 6.3.6 of EN15804:2012+A2:2019 have been followed, where 99% of the total energy and materials are included, and the total neglected input flows for the modules reported on in the LCA are less than 5% of the energy usage and mass.

Ce qui est inclus

En anglais
Full technical details on these products can be found at: https://www.proair.ie/products/proair-pa600li/

Domaine d'application

En anglais
The ProAir PA600LI/PA600PLI Heat Recovery Ventilation system is used in residential units, small offices, classrooms, etc. It supplies fresh air and extracts stale air on a continuous basis throughout the building. It is designed to operate continuously at a low rate to minimise the electrical energy consumption. It removes excess moisture from the premises, and prevents the build up of condensation and consequent mould. It has two low energy electrical fans and it operates silently. It uses G4 grade air filters and has touch screen control. It is best placed within the thermal envelope of the building say at high level in a utility room or hot press in order to save on floor space. If this is not an option it may be placed in the attic. Main features: • Heat Recovery Ventilation unit is suitable for residential and small commercial up to 180 - 220m² • Heat Exchanger: Counter-flow pure polyproplene plates • Fans: Two R3G190 Backward curved impellers • Air Handling Unit body: Expanded polyethylene with metal coverings • Air Filters: G4 Pleated panels on supply and extract • Control: 0-10v input variable speed, with timed boost over-ride • Max Airflow: 323 m3/hr @ 100PA The main materials used in the ProAir 600 PLI/LI are: Material: PE foam kg per FU: 4 - 7 Post consumer recycled material (%): 0 Pre-consumer recycled material (%): 0 Material: PVC and PVC fixings kg per FU: 1 - 2 Post consumer recycled material (%): 0 Pre-consumer recycled material (%): 0 Material: Silicone sealant kg per FU: 0.5 - 1.5 Post consumer recycled material (%): 0 Pre-consumer recycled material (%): 0 Material: Galvanised steel kg per FU: 3 - 5 Post consumer recycled material (%): 0 Pre-consumer recycled material (%): 0 Material: Hytdrocarbon sealant kg per FU: 1 - 2 Post consumer recycled material (%): 0 Pre-consumer recycled material (%): 0 Material: Electric motor kg per FU: 2 - 3 Post consumer recycled material (%): 0 Pre-consumer recycled material (%): 0 Material: Steel kg per FU: 0.05 - 0.15 Post consumer recycled material (%): 0 Pre-consumer recycled material (%): 0 Material: Mild steel kg per FU: 0.1 - 0.4 Post consumer recycled material (%): 0 Pre-consumer recycled material (%): 0 Material: Copper kg per FU: 0.1 - 0.2 Post consumer recycled material (%): 0 Pre-consumer recycled material (%): 0 Material: Brass kg per FU: 0.01 - 0.04 Post consumer recycled material (%): 0 Pre-consumer recycled material (%): 0 Material: Aluminium kg per FU: 3 - 5 Post consumer recycled material (%): 0 Pre-consumer recycled material (%): 0 Material: Cardboard kg per FU: 0.1 - 0.4 Post consumer recycled material (%): 0 Pre-consumer recycled material (%): 0 Material: LDPE kg per FU: 0.5 - 0.9 Post consumer recycled material (%): 0 Pre-consumer recycled material (%): 0 Material: PCB kg per FU: 0.2 - 0.5 Post consumer recycled material (%): 0 Pre-consumer recycled material (%): 0 Material: Neoprene kg per FU: 0.1 - 0.2 Post consumer recycled material (%): 0 Pre-consumer recycled material (%): 0 Material: Polycarbonate kg per FU: 0.001 - 0.01 Post consumer recycled material (%): 0 Pre-consumer recycled material (%): 0 Material: PP synthetic fibre kg per FU: 0.1 - 0.3 Post consumer recycled material (%): 0 Pre-consumer recycled material (%): 0 Material: Polypropylene kg per FU: 4.5 - 6 Post consumer recycled material (%): 0 Pre-consumer recycled material (%): 0 Material: Packaging kg per FU: 0 Post consumer recycled material (%): 0 Pre-consumer recycled material (%): 0 The units are delivered to site in company vans. No product packaging is used Component parts are assembled manually on an assembly line. The raw materials of the constituent components mostly comprise: PE, PVC, PP (fibre), neoprene, aluminium, mild steel, galvanised steel, copper, silicone & hydrocarbon sealants, and printed circuit boards. Electricity is used for lighting, heating and power for power tools.

Source et licence

Valeur
Additionnée par open-climate.ai à partir de ses parties
Éditeur
EPD Ireland (Irish Green Building Council)
Publié le
2 octobre 2026
Fin de validité
31 décembre 2027
Voir les données sources chez EPD Ireland

Les valeurs et leurs métadonnées sont diffusées en entier et réutilisables en citant l'éditeur.

Citez la source avec cette ligneEPD Ireland (Irish Green Building Council), EPD data from https://epdireland.lca-data.com
Une lecture simple de la licence, pas un avis juridique. Le texte de la licence fait foi.

Citer ce facteur

EPD Ireland (Irish Green Building Council), EPD data from https://epdireland.lca-data.com. Normalised by open-climate.ai, https://open-climate.ai/factors/libraries/epd_ireland/ (CC BY 4.0). https://open-climate.ai/factors/fr/ef-epdireland-proair_heat_recovery-ie-unit-cradle_to_grave-c53b5516/?v=efv1-7ff43057042b857bf61c001a6d13f499

Une valeur vous semble fausse ?

Dites-nous laquelle et pourquoi. Nous la vérifions à la source et vous répondons sous une semaine.