Emission factor from EPD Italy EPD, product-specific

ROLLER SHUTTERS PVC: Sole 5

Italy · EPD total · Reference year 2022

Each square metre of this product counts as 23.3 kg CO₂e over the modules its EPD declares: 24.5 to make it (A1–A3) and −1.23 at end of life.

Value per square metre, over the modules the EPD declares

23.3kgCO₂e/m²

EN 15804 modules A1 to A3 · Fossil only · GWP100 · AR5

Derived by open-climate.ai: the sum of EPD Italy's published parts

The one scenario this EPD declaresReference year 2022

Region
Italy IT
Boundary
EPD total
Data quality
HighRated by us, not by the source
Licence
Open · EPD Italy terms
Declared by
PINTO S.r.l.

Where 23.3 comes from

Derived by open-climate.ai

Σ 23.3: the two declared modules add up to the total. D stays beside it.

Reporting this square metre under the GHG Protocol

This period

Scope 3, category 2 24.5

The product becomes part of a building you own. The product and its installation go to category 2 in the year you buy it, the delivery to category 4. Use and end of life are reported in the years they happen.

Later, when it happens

At end of life, in the year of demolition

  • End of life Scope 3, category 5 −1.23

Outside the scopes, reported separately

  • D −14.6

A4, A5, B1 to B7 and C1 to C4 are not declared: nothing to report.

CiteAPI

The factor, standardised

Every factor on open-climate.ai answers the same questions in the same words, whatever the publisher. Open any ⓘ for the definition.

Materials › Construction products · Italy · per m² · Supplier-specific

EPD total · Fossil only · AR5

Boundary
EPD total
Raw materials, inbound transport, fuel supply, fuel combustion, manufacturing, packaging, purchased energy and end of life
GWP method
IPCC AR5, 100-year horizon
Not on the record; set from EPD Italy's method notes · impact method EF 3.0
CO₂e basis
Fossil only
Split by carbon origin, not by gas
Life cycle
Upstream: coveredProduction: coveredDownstream: not coveredEnd of life: partly covered

High quality · Open licence · Any year

Module by module, up to the total

Seventeen EN 15804 modules, always in the same order. Each declared one moves the running total; a negative one moves it down. D sits below zero after the total, because it is reported beside it.

kgCO₂e per square metre. Each bar starts where the one before ended. Pick a module to read it.
Product
Con­struc­tion
A4 to A5not de­clared
Use
B1 to B7not de­clared
End of life
Beyond the boundary

beside the total, not in it

What this number covers

Follow one square metre of this product through EN 15804's stages. The total counts what the EPD declares; what it leaves out stays visible.

  1. A1-A3Product

    Materials and making the product

    Included24.5
  2. A4-A5Construction

    Delivery and installation

    Not declared
  3. B1-B7Use

    The product in service: maintenance, repair, replacement and the energy and water it uses

    Not declared
  4. C1-C4End of life

    From demolition to disposal

    Included−1.23
  5. DBeyond the boundary

    Recovery after end of life

    Not in the total−14.6

Outside this boundary

  • Installation
  • Maintenance
  • Outbound transport
  • Retail
  • Use phase
  • Recycling credit

Maintenance is out because B2 is not declared. The recycling credit is module D, shown beside the total.

Gases

  • Fossil CO₂e23.3
  • Biogenic CO₂e0.857
  • Land-use CO₂e0.00351

The total counts fossil CO₂e. EPD Italy reports biogenic and land-use CO₂e separately; they are shown beside it, not added.

From EPD Italy's record to a comparable factor

EPD Italy publishes this EPD as one declared value. Each field as printed, and what open-climate.ai made of it.

The total and its modules

Use a module on its own when you report it in a different year or scope; never add one to the total.

You are here · the EPD total23.3
D beside−14.6
The two modules add up to the total; D stays beside it. Each opens its own page.

About this factor

From EPD Italy

What it is

For this LCA study, specific data (primary data) were used for processes within the Pinto plant in Polla (SA) and the Polesine plant (PR) (Core). Therefore, specific data are all the quantities of raw materials used, energy consumption, waste, and emissions concerning the shutter production cycle, data supplied directly by the company. Specific data are the distances calculated by the suppliers of the raw materials used and the means of transport used to transport them to the factory (primary data). Where generic data were used (e.g. for the schematisation of production processes associated with the various input materials), they were chosen to be representative for the area geographical area (Italy) and the reference technology. The generic data used for the calculation, i.e. the schematisations of the various products/processes within the calculation software, refer instead to databases updated in the last 10 years, as required by the PCRs. In the study, input and output data were allocated between the different processes while maintaining the principle of modularity: materials and energy flows to and from the environment are then assigned to the module in which they occur. According to the same criterion, no double counting was carried out counting for both input and output flows. The allocation criteria adopted for the LCA model comply with the reference standards (EN 15804, ISO 14044). The inventory data considered in the study represent at least 95% of the total inflows (mass and energy) to upstream processes, core processes and downstream processes.

What it includes

The reinforced PVC roller blind Sole 5 has a standard specific weight of approximately 5.0 kg/sqm. The reference flow equal to the weight of the product plus the weight of the packaging is 5.03 kg/sqm. The product is made of self-clinching slats (double-walled, with internal stiffening intersections and resin reinforcements) measuring 13 mm in base and 55 mm in height. The profile is equipped with a lateral 'anti-unthreading' stop that serves to block the slats. Thanks to its PVC reinforcement, the profile acquires mechanical resistance and dimensional stability by no longer requiring the application of metal reinforcements.

Where it applies

Production of ROLLER SHUTTERS PVC produced in the Pinto S.r.l. plant in Polla (SA) MATERIE PRIME QUANTITÀ GRANULO IN PVC 3,49 kg/ m2 RESINA 0,81 kg/ m2 SOTTOPRODOTTO 0,71 kg/m2

Source and licence

Value
Summed by open-climate.ai from its parts
Publisher
EPD Italy (ICMQ)
Published
2 October 2026
Valid until
31 December 2027
See the source data at EPD Italy

The values and their metadata are served in full and may be reused with credit to the publisher.

Credit it with this lineEPD Italy (ICMQ), EPD data from https://epditaly.lca-data.com
A plain reading of the licence, not legal advice. The licence text prevails.

Cite this factor

EPD Italy (ICMQ), EPD data from https://epditaly.lca-data.com. Normalised by open-climate.ai, https://open-climate.ai/factors/libraries/epd_italy/ (CC BY 4.0). https://open-climate.ai/factors/ef-epditaly-roller_shutters_pvc_sole-it-m2-epd_total-be4f2246/?v=efv1-dc52e2ef9003efdd6e8cd0cd5dbd253b

Something looks wrong?

Tell us which value and why. We check it against the source and answer within a week.