Value per kilogram, over the modules the EPD declares
0.75kgCO₂e/kg
EN 15804 modules A1 to A4 · Fossil only · GWP100 · AR5
Derived by open-climate.ai: the sum of EPD Italy's published parts
The one scenario this EPD declaresReference year 2023
- Region
- Italy IT
- Boundary
- EPD total
- Data quality
- HighRated by us, not by the source
- Licence
- Open · EPD Italy terms
- Declared by
- FERALPI SIDERURGICA SPA - FERALPI GROUP
- Declared unit
- Served per kilogram ÷ 1,000
Where 0.75 comes from
- A1-A3 Product stageDerived by open-climate.aiScope 3, cat. 10.64586%
- Scope 3, cat. 40.03044.1%
- End of lifeDerived by open-climate.aiScope 3, cat. 50.07439.9%
- Outside the scopes0.0751beside
Σ 0.75: the three declared modules add up to the total. D stays beside it.
Reporting this kilogram under the GHG Protocol
This period
Scope 3, category 1 0.645 Scope 3, category 4 0.0304
You buy the product for a building that is not yours. The product and its installation go to category 1, the delivery to category 4. The use stage belongs to the building owner; demolition waste you handle is category 5.
Later, when it happens
At end of life, in the year of demolition
- End of life Scope 3, category 5 0.0743
Outside the scopes, reported separately
- D 0.0751
A5, B1 to B7 and C1 to C4 are not declared: nothing to report.
The factor, standardised
Every factor on open-climate.ai answers the same questions in the same words, whatever the publisher. Open any ⓘ for the definition.
Materials › Metals · Italy · per kg · Supplier-specific
EPD total · Fossil only · AR5
- BoundaryEPD totalThe sum of every EN 15804 module an EPD declares, when that set is not the complete A-C grid (MOD-0034). Learn more
- EPD total
- Raw materials, inbound transport, fuel supply, fuel combustion, manufacturing, packaging, purchased energy, outbound transport and end of life
- GWP methodWhich IPCC assessment report's warming potentials convert each gas to CO₂e, and over how many years the warming is counted (GWP100: 100 years). Learn more
- IPCC AR5, 100-year horizon
- Not on the record; set from EPD Italy's method notes · impact method EF 3.0
- CO₂e basisWhich carbon the CO₂e counts. Fossil only leaves out biogenic CO₂ and land use; net total counts every pool, net of removals. The same activity on two bases is two different numbers. Learn more
- Fossil only
- Split by carbon origin, not by gas
- Life cycle
- Upstream: coveredProduction: coveredDownstream: partly coveredEnd of life: partly covered
High quality · Open licence · Any year
Module by module, up to the total
Seventeen EN 15804 modules, always in the same order. Each declared one moves the running total. D sits after the total, because it is reported beside it.
beside the total, not in it
| Module | Name | Per kilogram | Per t as declared | Running total | Status |
|---|---|---|---|---|---|
| A1 | Raw material supply | 0.486586 | 486.586 | 0.486586 | Declared |
| A2 | Transport to the plant | 0.0234555 | 23.4555 | 0.510042 | Declared |
| A3 | Manufacturing | 0.134891 | 134.891 | 0.644933 | Declared |
| A4 | Transport to site | 0.0303614 | 30.3614 | 0.675295 | Declared |
| A5 | Installation | not declared | 0.675295 | Not declared | |
| B1 | Use | not declared | 0.675295 | Not declared | |
| B2 | Maintenance | not declared | 0.675295 | Not declared | |
| B3 | Repair | not declared | 0.675295 | Not declared | |
| B4 | Replacement | not declared | 0.675295 | Not declared | |
| B5 | Refurbishment | not declared | 0.675295 | Not declared | |
| B6 | Energy in use | not declared | 0.675295 | Not declared | |
| B7 | Water in use | not declared | 0.675295 | Not declared | |
| C1 | Demolition | 0.0538328 | 53.8328 | 0.729128 | Declared |
| C2 | Waste transport | 0.0178226 | 17.8226 | 0.74695 | Declared |
| C3 | Waste processing | 0.00234952 | 2.34952 | 0.7493 | Declared |
| C4 | Disposal | 0.000278381 | 0.278381 | 0.749578 | Declared |
| Total | EPD total, declared modules | 0.749578 | 749.578 | Sum of the declared modules | |
| D | Beyond the system boundary | 0.0750913 | 75.0913 | not added | Beside the total, not in it |
Scenarios and units
Some EPDs price a module under several scenarios, such as different end-of-life routes. Each gets a tab, and each module's default is marked.
One scenario, as declared
Every module has one value, so there is nothing to choose.
- Per t, as declared749.578
- Per kilogram, served0.749578
What this number covers
Follow one kilogram of this product through EN 15804's stages. The total counts what the EPD declares; what it leaves out stays visible.
A1-A3Product
Materials and making the product
Included0.645A4-A5Construction
Transport to site only; A5 not declared
A4 only0.0304B1-B7Use
The product in service: maintenance, repair, replacement and the energy and water it uses
Not declaredC1-C4End of life
From demolition to disposal
Included0.0743DBeyond the boundary
Recovery after end of life
Not in the total0.0751
Outside this boundary
- Installation
- Maintenance
- Retail
- Use phase
- Recycling credit
Maintenance is out because B2 is not declared. The recycling credit is module D, shown beside the total.
Gases
- Fossil CO₂e0.75
- Biogenic CO₂e0.000502
- Land-use CO₂e0.000195
The total counts fossil CO₂e. EPD Italy reports biogenic and land-use CO₂e separately; they are shown beside it, not added.
From EPD Italy's record to a comparable factor
EPD Italy publishes this EPD with one value per module. Each field as printed, and what open-climate.ai made of it.
The total and its modules
Use a module on its own when you report it in a different year or scope; never add one to the total.
About this factor
From EPD Italy
What it is
Data quality has been assessed and validated during data collection process. According to ISO 14040 and 14044, allocation is avoided whenever possible by dividing the system into sub-systems. According to EN:15804 the applied cut-off criterion for mass and energy flows is 1%.What it includes
"Adherence and surface geometry fR or fP : - for Ø 6 mm fR or fP = 0.037 - for Ø 8 mm fR or fP = 0.045 - for Ø 10 mm fR or fP = 0.052 - for Ø 12 mm fR or fP = 0.056 - for Ø = 14 mm fR or fP = 0.059 Weldability: Ceq < 0.52 Typical yield stress: Re or Rp0.2 > 450 MPa Elongation: Agt > 2,5% Successful in bend and rebend test Successful in Tensile strength test and Fatigue strength test"Where it applies
"The mechanical properties of weldable hot-rolled coils, combined with a compact yet heavy packaging, facilitate storage in confined spaces. The special coil-on-coil processing ensures accurate and faster coil unwinding, giving considerable increases in output. The reduced number of daily changes results in fewer downtimes, less scrap and a higher level of safety in the workplace." "Stretched coil: Cross section range 6 = Ø = 20 mm Weight from 2 500 to 5 000 kg per coil Total wire length up to 22 000 m"Source and licence
- Value
- Summed by open-climate.ai from its parts
- Publisher
- EPD Italy (ICMQ)
- Published
- 2 October 2026
- Valid until
- 31 December 2028
The values and their metadata are served in full and may be reused with credit to the publisher.
Cite this factor
EPD Italy (ICMQ), EPD data from https://epditaly.lca-data.com. Normalised by open-climate.ai, https://open-climate.ai/factors/libraries/epd_italy/ (CC BY 4.0). https://open-climate.ai/factors/ef-epditaly-stretched_coils-it-kg-epd_total-7740b219/?v=efv1-772068de18269ec0fa46a0f08dba9d86
Something looks wrong?
Tell us which value and why. We check it against the source and answer within a week.