Emission factor from ÖKOBAUDAT OBD_2024_III EPD, product-specific

Fine Fissured Hi NRC

China · EPD total · Reference year 2024

Each square metre of this product counts as 22.2 kg CO₂e over the modules its EPD declares: 22.1 to make it (A1–A3) and 0.0808 at end of life.

Value per square metre, over the modules the EPD declares

22.2kgCO₂e/m²

EN 15804 modules A1 to A3 · Fossil only · GWP100 · AR5

FossilBio CH₄Land useBio CO₂EN 15804 GWP-fossil

Derived by open-climate.ai: the sum of ÖKOBAUDAT's published parts

The one scenario this EPD declaresReference year 2024

Region
China CN
Boundary
EPD total
Data quality
HighRated by us, not by the source
Licence
Open · ÖKOBAUDAT terms
Declared by
Knauf Ceiling Solutions GmbH & Co. KG

Where 22.2 comes from

Derived by open-climate.ai

Σ 22.2: the two declared modules add up to the total.

Reporting this square metre under the GHG Protocol

This period

3.2 Equipment 22.1

The product becomes part of a building you own. The product and its installation go to category 2 in the year you buy it, the delivery to category 4. Use and end of life are reported in the years they happen.

Later, when it happens

At end of life, in the year of demolition

  • End of life 3.5 Waste 0.0808

A4, A5, B1 to B7 and C1 to C4 are not declared: nothing to report.

CiteAPI

The factor, standardised

Every factor on open-climate.ai answers the same questions in the same words, whatever the publisher. Open any ⓘ for the definition.

Materials › Construction products · China · per m² · Supplier-specific

EPD total · Fossil only · AR5

Boundary
EPD total
Raw materials, inbound transport, fuel supply, fuel combustion, manufacturing, packaging, purchased energy and end of life
GWP method
IPCC AR5, 100-year horizon
Not on the record; set from ÖKOBAUDAT's method notes · impact method EF 3.0
CO₂e basis
Fossil onlyFossilBio CH₄Land useBio CO₂EN 15804 GWP-fossil
Split by carbon origin, not by gas
Life cycle
Upstream: coveredProduction: coveredDownstream: not coveredEnd of life: partly covered

High quality · Open licence · Any year

Module by module, up to the total

Seventeen EN 15804 modules, always in the same order. Each declared one moves the running total.

kgCO₂e per square metre. Each bar starts where the one before ended. Pick a module to read it.
Product
Con­struc­tion
A4 to A5not de­clared
Use
B1 to B7not de­clared
End of life
C1not de­clared
C3not de­clared
Beyond the boundary
Dnot de­clared

What this number covers

Follow one square metre of this product through EN 15804's stages. The total counts what the EPD declares; what it leaves out stays visible.

  1. A1-A3Product

    Materials and making the product

    Included22.1
  2. A4-A5Construction

    Delivery and installation

    Not declared
  3. B1-B7Use

    The product in service: maintenance, repair, replacement and the energy and water it uses

    Not declared
  4. C1-C4End of life

    From demolition to disposal; C1, C3 not declared

    C2, C40.0808
  5. DBeyond the boundary

    Recovery after end of life

    Not declared

Outside this boundary

  • Installation
  • Maintenance
  • Outbound transport
  • Retail
  • Use phase
  • Recycling credit

Maintenance is out because B2 is not declared.

Gases

  • Fossil CO₂e22.2
  • Biogenic CO₂e0.0103
  • Land-use CO₂e0.0159

The total counts fossil CO₂e. ÖKOBAUDAT reports biogenic and land-use CO₂e separately; they are shown beside it, not added.

From ÖKOBAUDAT's record to a comparable factor

ÖKOBAUDAT publishes this EPD as one declared value. Each field as printed, and what open-climate.ai made of it.

The total and its modules

Use a module on its own when you report it in a different year or scope; never add one to the total.

You are here · the EPD total22.2
The two modules add up to the total. Each opens its own page.

About this factor

From ÖKOBAUDAT

What it is

The ceiling tiles are manufactured using a wet-felt process and consist of biosoluble mineral wool, perlite, clay and starch. In addition, the visible side of the mineral tile is painted with dispersion paint. The back side is primed with dispersion paint. The mineral tiles are available in different formats and edge finishes. This EPD applies to the following products: Fine Fissured Hi NRC

What it includes

The mineral tiles are produced in the traditional wet process (wet-felt). The raw materials are mixed with water to form a homogeneous suspension, which is pumped onto a belt conveyor (Fourdrinier). The water is removed mechanically (gravity and vacuum) and by evaporation in the drying oven. As far as possible, the process water is reused. It is treated accordingly and fed back into the process water circuit. Production waste and dust are reused in the process in the sense of an internal cycle. The manufacturing plant is certified according to ISO 9001, ISO 14001 and ISO 45001. Technical data: Performance data of the product with respect to its characteristics according to the relevant technical provision (no CE marking). Declared unit: This EPD refers to a declared unit of 1 m² Fine Fissured Hi NRC mineral ceiling tiles with a surface weight of 4.51 kg/m².
Show ÖKOBAUDAT's original (German)
Die Mineralfliesen werden im traditionellen Nassverfahren (Nassfilz) hergestellt. Die Rohstoffe werden mit Wasser vermischt, um eine homogene Suspension zu bilden, die auf ein Förderband (Langsieb) gepumpt wird. Das Wasser wird mechanisch (Schwerkraft und Vakuum) und durch Verdampfung im Trockenofen entfernt. Das Prozesswasser wird so weit wie möglich wiederverwendet. Es wird entsprechend aufbereitet und dem Prozesswasserkreislauf wieder zugeführt. Produktionsabfälle und Staub werden im Sinne eines internen Kreislaufs im Prozess wiederverwendet. Die Produktionsstätte ist nach ISO 9001, ISO 14001 und ISO 45001 zertifiziert. Technische Daten: Leistungsdaten des Produkts in Bezug auf seine Merkmale gemäß der einschlägigen technischen Vorschrift (keine CE-Kennzeichnung). Deklarierte Einheit: Diese EPD bezieht sich auf eine deklarierte Einheit von 1 m² Fine Fissured Hi NRC Mineraldeckenplatten mit einem Flächengewicht von 4,51 kg/m².

Where it applies

Mineral tiles (wet-felt) are typically used as lay-in for suspended ceiling constructions. They are primarily used as optical cladding, but also for sound absorption and sound insulation, for fire resistance and against fire spreading, for cleanrooms and high hygiene requirements.

Source and licence

Value
Summed by open-climate.ai from its parts
Publisher
ÖKOBAUDAT (BBSR / BMWSB)
Published
13 November 2026
Valid until
31 December 2029
See the source data at ÖKOBAUDAT

The values and their metadata are served in full and may be reused with credit to the publisher.

Credit it with this lineSource: ÖKOBAUDAT (OBD_2024_III), BBSR / BMWSB. Individual EPDs © their respective programme operators / declaration owners.
The publisher's text on this page is translated by open-climate.ai.A plain reading of the licence, not legal advice. The licence text prevails.

Cite this factor

Source: ÖKOBAUDAT (OBD_2024_III), BBSR / BMWSB. Individual EPDs © their respective programme operators / declaration owners. Normalised by open-climate.ai, https://open-climate.ai/factors/libraries/okobaudat/ (CC BY 4.0). https://open-climate.ai/factors/ef-okobaudat-fine_fissured_hi_nrc-cn-m2-epd_total-1ae22c32/?v=efv1-11fade2bcc065b5060dd087bb555d6d9

Something looks wrong?

Tell us which value and why. We check it against the source and answer within a week.

Page data as of .