Emission factor from ÖKOBAUDAT OBD_2024_III
Use - 1 kWh of final energy from oil low temp. and calorific value (acc. GEG)
Germany · Well-to-use · Any year
Value per kWh, net calorific value
0.32kgCO₂e/kWh
Net calorific value · Fossil only · GWP100 · AR6
FossilBio CH₄Land useBio CO₂EN 15804 GWP-fossilOne value, valid until 31 December 2026
ÖKOBAUDAT sets this validity and gives no value for another period, so there is no year to pick.
Reference year 2023
- Region
- Germany DE
- Boundary
- Well-to-use
- Data quality
- MediumRated by us, not by the source
- Licence
- Open · ÖKOBAUDAT terms
Where 0.32 comes from
- Fossil emissionsScope 1 3.3 Energy upstream0.32100%
- Biogenic CO₂Outside0.000413beside
Σ 0.32: the fossil emissions are the total. ÖKOBAUDAT reports 0.000413 of biogenic CO₂ beside it, never in it.
Reporting this kilowatt-hour under the GHG Protocol
Scope 1 + 3.3 Energy upstream 0.32
This one figure covers both together; no split between them is given.
You burn the fuel, so its combustion is your Scope 1.
Supplying the fuel is Scope 3, category 3 for whoever burns it.
The factor, standardised
Every factor on open-climate.ai answers the same questions in the same words, whatever the publisher. Open any ⓘ for the definition.
Fuels › Liquid fossil fuels · Germany · per kWh · Generic
Well-to-use · Fossil only · AR6
- BoundaryWell-to-useOne unit of energy as consumed, priced from the well to the point of use: the well-to-tank chain plus the burn for a fuel; generation, its well-to-tank and the transmission and distribution losses for a delivered carrier (electricity, steam or hot water, chilled water). Learn more
- Well-to-use
- Fuel supply and fuel combustion
- GWP methodWhich IPCC assessment report's warming potentials convert each gas to CO₂e, and over how many years the warming is counted (GWP100: 100 years). Learn more
- IPCC AR6, 100-year horizon
- Not on the record; set from ÖKOBAUDAT's method notes · impact method EF 3.1
- CO₂e basisWhich carbon the CO₂e counts. Fossil only leaves out biogenic methane, land-use change and biogenic CO₂; excl. biogenic CO₂ counts biogenic methane but not the other two; net total counts every pool, net of removals. The same activity on two bases is two different numbers. Learn more
- Fossil onlyFossilBio CH₄Land useBio CO₂EN 15804 GWP-fossil
- Split by carbon origin, not by gas
Medium quality · Open licence · Any year
What this number covers
The path of one kilowatt-hour of this fuel, from the well to your flame.
Well-to-tank
Extraction
Getting the fuel out of the ground
Processing
Treating it to the quality it is sold at
Transport
Moving it to your site
Your meter
1 kWh used. The factor is per kWh measured here.
Burning it
In your boiler, furnace or engine: CO₂, with a little CH₄ and N₂O
= 0.32 per kWh
Outside this boundary
- Making the boiler that burns it
- Building the pipelines and the network
ÖKOBAUDAT counts the fuel, not the things built to extract, move and burn it.
Gases
- Fossil CO₂e0.32
- Biogenic CO₂e0.000413
- Land-use CO₂e0.0000141
The total counts fossil CO₂e. ÖKOBAUDAT reports biogenic and land-use CO₂e separately; they are shown beside it, not added.
From ÖKOBAUDAT's record to a comparable factor
ÖKOBAUDAT publishes this factor as one German record. Here is each field as printed and what open-climate.ai made of it.
About this factor
From ÖKOBAUDAT
What it is
This data set has been modeled according to the European Standard EN 15804+A2 for Sustainable Building. Results are depicted in modules that allow the structured expression of results over the entire life cycle.What it includes
This dataset includes crude oil extraction, refinery processes, transportation and combustion of the fuel oil. Since final energy according to EnEV is provided as a reference, a boiler efficiency of 100% was modelled. Usually occurring system losses, as well as auxiliary energy and electricity consumption in relation to boiler operation are not included in this data set. The life cycle assessment is dominated by the combustion process.Show ÖKOBAUDAT's original (German)
In diesem Datensatz ist die Erdölgewinnung, Raffinerieprozesse, Transporte und die Verbrennung des Heizöls inbegriffen. Da Endenergie gem. EnEV als Bezugsgröße vorgesehen ist, wurde eine Kesseleffizienz von 100% bilanziert, d.h. üblicherweise auftretende Anlagenverluste, sowie Hilfsenergie und Stromverbrauch in Bezug auf den Kesselbetrieb sind in diesem Datensatz nicht enthalten. Die Ökobilanz wird durch den Verbrennungsprozess dominiert.Where it applies
Thermal energy from light fuel oil is used for heating a building or technical processes (e.g. drying).Source and licence
- Publisher
- ÖKOBAUDAT (BBSR / BMWSB)
- Library
- ÖKOBAUDAT OBD_2024_III
- Record
- 6ecefd2c-71c8-44f1-9959-6a8567a661c9 · process UUID
- Published
- 13 November 2026
- Valid until
- 31 December 2026
- Status
- Generic dataset
The values and their metadata are served in full and may be reused with credit to the publisher.
Cite this factor
Source: ÖKOBAUDAT (OBD_2024_III), BBSR / BMWSB. Individual EPDs © their respective programme operators / declaration owners. Normalised by open-climate.ai, https://open-climate.ai/factors/libraries/okobaudat/ (CC BY 4.0). https://open-climate.ai/factors/ef-okobaudat-use_1_kwh_of_final-de-kwh-b6-e46431a0/?v=efv1-efb575df6a610bd8cd83235dfe05d391
Something looks wrong?
Tell us which value and why. We check it against the source and answer within a week.
Page data as of .