GHGPI - GHG Platform India

India's emission factors for fuel combustion, coal mining and oil and gas methane, livestock and rice, as GHG Platform India publishes them beside its national emission estimates.

Non-profitSpecialistOpen licence

Publisher's page Browse 173 factors

Factors

173

Values

173

One per year and method

Countries

1 region, sub-national included

Edition

2022-series + 2019-series

published 1 Sept 2022 · all versions

Last loaded

17 Oct 2026

Report a newer version

Overview

GHG Platform India is a civil-society initiative that estimates India's greenhouse gas emissions sector by sector, each sector led by an Indian research institution. Two of its workbooks print the emission factors behind those estimates. The energy workbook (Phase IV, prepared by CSTEP, version 3, published September 2022, covering 2005 to 2018-19) gathers fuel combustion factors for electricity generation, transport, and residential, commercial, agriculture and fisheries use, with methane factors for coal mining and for oil and natural gas. The agriculture, forestry and other land use workbook (Phase III, prepared by Vasudha Foundation, version 3, 2019, covering 2005 to 2015) prints methane and nitrous oxide factors for livestock and methane factors for rice. The factors are a compilation: India's own net calorific values and CO2 factors, IPCC default methane and nitrous oxide factors for fuel combustion, and Indian values for coal mining, oil and gas, livestock and rice.

At a glance

Publisher: GHG Platform India
Kind: Non-profit
Scope: Specialist2 categories each hold at least 5% of its factors; the largest, Direct emissions, holds 60.4%. A generalist needs 4.
Home region: India
Edition: 2022-series + 2019-series
Licence: Open licence (ghgp-india-terms)

Open data

How this works

What open-climate.ai standardised

over the publisher's own fileHow we standardise

One category axis

173 of 173 factor values mapped to one category

Learn more 6 checks behind this

Coded regions

1 region as an ISO or registry code

173 take the publisher's default region, stated rather than assumed

Learn more 3 checks behind this

Canonical units

5 canonical units in 5 unit families, raw unit kept

Learn more 4 checks behind this

Warming potentials

0 factor values recalculated on AR6

65 factor values already on AR6

108 factor values left on the publisher's GWP

Learn more 7 checks behind this · 1 known limitation

7 more things standardised

Declared boundaries

5 boundary codes

36 factor values state in, out or varies for each scope term

Learn more 8 checks behind this

Parts and parents

72 factor values grouped under 101 parents

Use a part on its own, or the parent when you want the whole.

Learn more 4 checks behind this

Estimated fuel legs

36 estimated supply-chain legs (well-to-tank) the publisher does not print

36 totals over burning and supply

Learn more 7 checks behind this

Data quality

173 of 173 factor values rated on one quality tier

Learn more 7 checks behind this

Languages

English: 100.0% of factor values

German: 100.0% of factor values

French: 100.0% of factor values

Learn more 11 checks behind this

Traceable to the source

108 source rows archived

34 rows skipped, each with a reason

Learn more 5 checks behind this

Stable addresses

Slugs never break

Learn more

Audit checks

132 passed1 known limitation3 enforced when loadedlast run 22 Oct 2026

Checks we run on every load to keep the data above trustworthy. Counts are for this library; the grey figure is the same check across all libraries. Point at the i to see why a check matters.

What the statuses mean How checks are counted Why we check How checks are grouped

Needs attention

Values that exclude a carbon pool list the gases behind the total
Known limitation · 36 in this library · 180,272 in all libraries
Why it matters With no breakdown by gas, nothing can confirm that a fossil-only or biogenic-CO2-excluded total really leaves those pools out. The value rests on the publisher's word alone.

One category axis

Learn more

Every source category maps to our vocabulary
Enforced when loaded
Why it matters A factor with no category drops out of every category filter and comparison. The load stops rather than serve one.
The publisher's classification is kept
Passed
Why it matters You can still find a factor the way the publisher filed it, and check our mapping against theirs.
Every classification level has a valid parent
Passed
Why it matters A broken tree hides factors from browse and puts them in the wrong category totals.
Every product code comes with the codes above it
Passed
Why it matters In product codes like HS or CPC, a search for a chapter should reach every code inside it. A missing level hides the factor from that search.
A publisher's own classification is used only by that publisher
Passed
Why it matters A publisher's own tree only makes sense inside its library. Filed under another publisher's codes, a factor would show up in categories that do not describe it.
A standard classification code has one label in every library
Passed
Why it matters Codes like NACE or NAICS are meant to link libraries. If one code carries two labels, you cannot tell whether both libraries mean the same activity.

Coded regions

Learn more

Every region is a known code
Enforced when loaded
Why it matters Free text like “France continentale” cannot be filtered or joined to your own data. A code can.
No named region is filed under a broader one
Passed
Why it matters A French factor filed as World would be applied to the wrong country, or lose to a global value in a search for France.
Every region sits in the world hierarchy
Passed
Why it matters A search for Europe has to reach France. A region outside the hierarchy is invisible to broader searches.

Canonical units

Learn more

Every unit is a known code
Enforced when loaded
Why it matters Activity data only multiplies correctly when the unit is exact. An unknown unit stops the load.
One source unit maps to one unit
Passed
Why it matters If one of the publisher's units were read as two different units, factors that share it would give inconsistent footprints.
A unit label means the same in every library
Passed
Why it matters Comparing two libraries is only safe when a label like t.km means tonne-kilometre in both.
A unit label that names no basis folds one way
Passed · 2 in all libraries
Why it matters A label like GJ says nothing about the heating value behind it. If the same bare label folds to two different units, two factors that look alike are not comparable.

Declared boundaries

Learn more

Every boundary states what it includes
Passed
Why it matters Cradle-to-gate and full life-cycle values can differ several times over. Without a stated boundary you cannot tell which you are adding up.
Boundary scope terms are known codes
Passed
Why it matters Consistent terms let you keep exactly the life-cycle stages your inventory needs.
No two factors for the same activity partly overlap in scope
Passed
Why it matters Two totals that share some stages but not all cannot safely be added or swapped: adding them counts the shared stages twice.
Separate stages of one activity are linked as parts
Passed
Why it matters Stages served as unrelated factors give no total, so you may use one stage and miss the others.
Every part of a factor states its boundary
Passed
Why it matters A part with an unknown boundary cannot be told apart from the other parts, so you cannot pick out, say, the combustion share of a total.
Every biofuel counted with its biogenic CO2 says how much
Passed
Why it matters Some publishers count the CO2 a burnt biofuel releases and others leave it out. Search tells the counting ones apart by their biogenic CO2 figure, so a factor without it would be offered to someone who asked to leave that CO2 out.
No recycling credit is hidden inside a life-cycle total
Passed
Why it matters A negative total may be a credit for avoided emissions. Filed as a life-cycle burden, it would quietly subtract emissions from your footprint.
No burden value hides a credit inside it
Passed · 348 in all libraries
Why it matters When a value that leaves biogenic carbon out is negative, that usually means a credit was subtracted inside it. Used as a burden, it lowers your footprint by a saving that is not yours to claim.

Warming potentials

Learn more

Methane and nitrous oxide figures match the stated GWP
Passed
Why it matters If a gas's CO2e is not its mass times the stated GWP, the GWP label is wrong, and converting the value to another GWP version would give a wrong result.
Every convertible value has its AR6 version
Passed
Why it matters Reporting now asks for AR6. Mixing AR5 and AR6 shifts methane-heavy totals by several percent.
CO2e totals leave out what their basis excludes
Passed
Why it matters A value's basis names the carbon pools its total leaves out. When the gas breakdown shows the total counting one of them anyway (biogenic CO2, land-use change, or biogenic methane on a fossil-only value), the label or the total is wrong.
Values that exclude a carbon pool list the gases behind the total
Known limitation · 36 in this library · 180,272 in all libraries
Why it matters With no breakdown by gas, nothing can confirm that a fossil-only or biogenic-CO2-excluded total really leaves those pools out. The value rests on the publisher's word alone.
Standardised figures keep every gas the publisher lists
Passed
Why it matters The comparable figure we serve must carry each gas the publisher reported. A lost gas makes the breakdown disagree with the total and hides that gas from you.
Every value states what its CO2e total includes
Passed
Why it matters For a biofuel, a total with or without biogenic CO2 can differ widely. Without that convention you cannot tell which one you are comparing.
A library with no AR6 version at all has a recorded reason
Passed
Why it matters Values that cannot be converted to AR6 cannot be compared with AR6 figures. That has to be a documented decision, not something missed at load.

Parts and parents

Learn more

Every part links to a valid parent
Passed
Why it matters A part that points nowhere gets summed twice or dropped when you use the parent total.
No factor is an unlinked part of another factor
Passed
Why it matters If one stage of a total is also served on its own, beside that total, adding both counts the same emissions twice.
No part is larger than the total it belongs to
Passed
Why it matters A part of a total cannot exceed it unless another part is negative. Where one does, either the total or the part is misprinted, and the two give different footprints for the same purchase.
Every factor points to its top parent
Passed
Why it matters Search groups parts under their top factor. A stale link shows a part as a stand-alone result.

Estimated fuel legs

Learn more

No fuel estimate is served where the publisher printed the supply-chain figure
Passed
Why it matters When the publisher states the figure itself, theirs is the one to use. An estimate beside it would give you two answers to the same question.
No supply-chain estimate is served for a fuel we deliberately left out
Passed
Why it matters Some fuels are left out on purpose, for instance when no published supply-chain figure fits them. An estimate on one of them would be a number we decided not to stand behind.
Every fuel estimate is built only from data we may redistribute
Passed
Why it matters An estimate derived from restricted data would pass that data on under our open licence, which its owner never allowed.
No fuel supply-chain estimate is rated above what its method allows
Passed
Why it matters Each way of estimating a fuel's supply chain has a highest rating it can earn, and an estimate never outranks the combustion figure it builds on. A better rating would lead you to trust it more than it deserves.
Every fuel eligible for a supply-chain estimate is classified
Passed
Why it matters The supply-chain estimate depends on which fuel is burned. A fuel nobody has classified gets no estimate, so you would miss that part of its emissions without knowing why.
Every fuel supply-chain estimate still matches the figures it was computed from
Passed
Why it matters The estimate scales the publisher's combustion figure by a supply-chain ratio taken from other published data. When either is revised or withdrawn, the estimate is out of date until it is recomputed.
The text of each fuel supply-chain estimate matches its current figures
Passed
Why it matters Its description states the year, the figures, the ratio and the quality behind the estimate. If those moved, the text would explain a different number than the one served.

Data quality

Learn more

Quality ratings fall inside their scale
Passed
Why it matters An out-of-scale rating cannot be compared, so the value would be ranked arbitrarily.
Every zero value is explained
Passed
Why it matters A zero can be real (contracted renewable power) or a gap in the data. A gap read as real erases emissions from your total.
No default value is withheld for poor quality
Passed
Why it matters A default rated too poor to serve is hidden from search and exports, so that factor is missing for you even when it is the right one.
No implausibly high per-kilogram value is rated reliable
Passed
Why it matters Above 1,000 kgCO2e per kg is often a unit slip, such as grams read as kilograms. Rated reliable, such a value could inflate a footprint a thousandfold.
Every quality level gives a recognised reason
Passed
Why it matters The reason explains why a value got its quality level. An unrecognised one cannot be filtered on or explained to you.
A zero that is only a gap in the source is withheld
Passed
Why it matters A zero with no quality signal, or an implausible regulatory default of zero, is more likely missing data than a real zero. Served, it would erase emissions from your total.
The library is not rated entirely on one fallback quality level
Passed
Why it matters When every value gets the same level because the publisher gives no quality signal, the level tells you nothing and cannot rank one value above another.

Languages

Learn more

Every factor has an English name
Passed
Why it matters Every factor can be searched and cited in one shared language, whatever the publisher's.
Translations match the current source text
Passed
Why it matters When the publisher rewords a label, an old translation can describe a different activity than the one priced.
Translations follow a corrected source text
Passed
Why it matters When we correct an English label, a French or German label translated from the old wording can still describe what the old wording said.
Recorded translations survive a reload
Passed
Why it matters A reload rewrites a library's labels; a translation we recorded and did not put back leaves that factor without a label in that language.
Every served factor has a name
Passed
Why it matters A factor with no name in any language shows as a blank row: you cannot search for it or tell what it measures.
Factors are searched on their English name where one exists
Passed · 24 in all libraries
Why it matters Search matches your query against one name per factor. A name kept in the publisher's language, when an English one exists, is harder to find in English.
Every language with a main name also has a full name
Passed
Why it matters Without the full name, the detail that tells similar factors apart is missing in that language, so two different factors can look identical.
Full names are built from their parts in the same language
Passed
Why it matters A full name must read as the main name followed by its detail. Translated separately, it can drift and describe a slightly different activity.
Every text is labelled with its real language
Passed
Why it matters A French name labelled English would be shown to English readers and matched against English searches.
Every description is available for display and translation
Passed
Why it matters A description missing from the per-language text store is not shown in your language, and never gets translated.
Every usage note is available for display and translation
Passed
Why it matters Names and notes are served from one text store per language. A note missing from that store is not shown, and never gets translated.

Traceable to the source

Learn more

Values traced to one source row agree with each other
Passed
Why it matters Each value traces back to one source row. When values that disagree share a row, it can back only one of them, which weakens that audit trail.
No duplicate factors are served
Passed
Why it matters Identical duplicates split search results and invite counting the same factor twice.
No factor value claims two things that cannot both be true
Passed
Why it matters For example, a purchaser price that leaves out retail or delivery. One of the two claims is wrong, and you cannot tell which.
No energy factor answers a question about packaging or recycling
Passed · 169 in all libraries
Why it matters Packaging and recycling credits belong to goods. On a value per kilowatt-hour they usually mean the boundary was read from the wrong kind of factor. A declared product sold per kilowatt-hour can still carry them, so each case is reviewed.
No factor value the publisher has withdrawn is still served
Passed · 14,762 in all libraries
Why it matters The publisher's end date for the value has passed. The figure may be out of date, so look for a newer one before you use it.

Other checks

One activity keeps one family across its units
Passed · 8 in all libraries
Why it matters When a publisher prints the same activity per kg and per kWh, the two factors belong to one activity family, with the unit as a choice. Filed as separate activities, they look unrelated, and nothing says they measure the same thing.
An activity's grouping key names only the activity
Passed · 12 in all libraries
Why it matters If the key also carried the unit, country or scope, one activity would split into several, and search would not show you its other versions side by side.
A Creative Commons credit names its licence
Passed
Why it matters CC BY asks you to say which licence applies. A credit that leaves it out makes your attribution incomplete when you copy it.
No note of ours appears in the credit or licence notice
Passed
Why it matters Our own notes on how we handle the data would end up in the credit you reproduce, as if the publisher had written them.
The credit line carries no terms of use
Passed
Why it matters You copy the credit line as it stands. Terms of use belong in the licence notice, which you read rather than reproduce.
Every impact assessment method is a recognised code
Passed
Why it matters Free text in place of a code splits one method into several spellings, so filtering by method misses some of its values.
Summed totals keep their parts' classification
Passed
Why it matters A total takes a classification only when all its parts share it. Otherwise it lands in a category its parts do not support, or misses one they all share.
Every summed total has a classification when its parts do
Passed
Why it matters A total with no classification drops out of every category filter, even though its parts are filed there.
Green-electricity zeros are not rated below market-based peers
Passed
Why it matters A green-contract zero is the contract's own figure. Marked down for being zero, it would lose to less relevant values when you look up contracted supply.
An avoided credit is linked to the burden it belongs to
Passed
Why it matters Served on its own, a credit reads as a factor in its own right. Linked beside its burden, it applies only where it belongs and is never subtracted twice.
Every value is typed as specific, generic or average
Passed
Why it matters The type says how closely a figure fits the product you bought. Any other word would be invisible to a filter on it.
The market-based value is the default
Passed
Why it matters The default then matches the figure most Scope 2 reports lead with, and a green-tariff zero is never the default when another figure exists.
Summed totals equal their parts on every gas
Passed
Why it matters Where a total is the sum of its parts, the two must agree on every gas. Otherwise your footprint changes depending on whether you use the total or the parts.
No total is served when one of its parts is withheld
Passed
Why it matters Where we add up a total from its parts and one part is rated too poor to serve, the total is held back with it. Otherwise you would get a figure that rests on a number we do not stand behind.
Validity dates are the publisher's own, never guessed
Passed
Why it matters A start date we invented looks just like one the publisher printed, and would hide correct factor values from a search for what applied on a given date.
Every district-heat factor says whether the network's heat loss is included
Passed · 2 in all libraries
Why it matters Heat is lost in the pipes between the plant and the building. Only the publisher can say whether a factor divides by heat produced or heat delivered, so a factor that leaves it unsaid is listed until its library's method is read.
Quality breakdowns use their scheme's axes
Passed
Why it matters A score on an axis the scheme does not define, or off its scale, cannot be read, so the breakdown behind a rating would mislead.
No battery-electric vehicle carries tailpipe emissions
Passed
Why it matters An electric vehicle has no tailpipe. A non-zero combustion figure means its electricity emissions sit in the wrong place, or are counted twice.
The text of each estimated electricity total matches its current figures
Passed
Why it matters The description of an estimated electricity total states its year, mix, quality and the parts it adds up. If those moved, the text would explain a different number than the one served.
Every estimated factor carries its description in each language
Passed
Why it matters An estimated factor is one we computed, not one a publisher printed. Its description says so and names the data behind it. Without it, you could not tell the estimate from a published figure.
The text of each estimated factor matches its current figures
Passed
Why it matters An estimated factor's description states the year, shares and quality behind it. If those moved, the text would explain a different number than the one served.
A total built on an estimated part is marked as estimated
Passed
Why it matters If the total lost the mark, you would read a figure we partly computed as one the publisher printed.
Every estimate is built only from data we may redistribute
Passed
Why it matters An estimate derived from restricted data would pass that data on under our open licence, which its owner never allowed.
No estimated factor is rated above the data it was built from
Passed
Why it matters An estimate cannot be more reliable than its inputs. Rating it higher would lead you to trust it more than a published figure.
No estimate sits beside a total of unclear scope
Passed
Why it matters When the publisher does not say whether its total includes a stage, our estimate of that stage may count it twice. These cases are listed for review.
No estimate repeats a stage the publisher's total already includes
Passed
Why it matters If the publisher's figure already covers, say, grid losses, adding our estimate of those losses would count them twice and overstate your emissions.
Every factor we complete has all of its estimated parts
Passed · 25 in all libraries
Why it matters If one part, such as grid losses, is missing where the others were estimated, a total built from them silently leaves that part out.
No estimate is served where the publisher printed the figure
Passed
Why it matters When the publisher states the number itself, theirs is the one to use. An estimate beside it would give you two answers to the same question.
We only estimate for publishers whose rule allows it
Passed
Why it matters Some publishers print every part themselves, or are deliberately left as they are. An estimate added to them would mix our numbers into theirs, against the rule set for that library.
Every estimated factor still matches the inputs it was computed from
Passed
Why it matters When an input is revised or withdrawn, the estimate built on it is out of date until it is recomputed.
No estimated total competes with a published one
Passed
Why it matters Where the publisher prints a total for the same activity, region and year, an estimated total beside it would give you two answers to the same question.
Every factor with a current value has a default
Passed
Why it matters A factor with values but no default is left out of the served catalogue, so you would never find it in search or exports.
Every factor has a value, in a library that publishes values
Passed
Why it matters A factor listed with no number looks like a match in search but gives you nothing to calculate with.
Per-gas values are in CO2e
Passed
Why it matters Each gas line is stored as kg CO2e, so the lines add up to the total. A line stored as a raw gas mass under-states methane and nitrous oxide 27 to 273 times.
Every tagged gas has a known GWP
Passed
Why it matters A kilogram of one named gas is restated in AR6 with that gas's own GWP. A tag the GWP table does not carry would leave the value unconverted, or convert it with the wrong number.
Every fixed group of regions lists what it covers
Passed
Why it matters A group like “Europe outside the EU” with no member list cannot be placed, so its factor values never match a search for any country in it.
Where both exist, the residual mix is shown before the green-tariff zero
Passed
Why it matters Green electricity counts as zero only for buyers who hold the matching certificates. Showing zero by default would understate everyone else's emissions.
Every green-electricity zero is a market-based value
Passed
Why it matters A zero from a green contract only holds for the buyer of that contract. Filed as location-based, it would put a zero on the physical grid.
Every electricity factor states its mix
Passed
Why it matters Without its mix you cannot tell a location-based figure from a market-based one, and Scope 2 reporting needs both side by side.
The newest edition of each value is the one marked current
Passed
Why it matters If an older edition stayed marked as current, you would get superseded numbers, or two answers for the same factor.
Every publisher has a rule on whether we estimate its missing parts
Passed
Why it matters For electricity and fuels we can estimate parts a publisher leaves out, such as grid losses or the fuel supply chain. Without a rule, a missing part could be a gap or a deliberate choice, so nothing is estimated until one is set.
Factor descriptions describe the factor, not the whole library
Passed · 2 in all libraries
Why it matters When the same long text is repeated on every factor, it tells you nothing about the one you are looking at and hides what is specific to it.
Every library's licence has its rights recorded
Passed
Why it matters Without them, the library page cannot tell you what you may do with the data: share it, change it or use it commercially.
No fossil electricity mix has a zero fuel supply chain
Passed
Why it matters Electricity with fossil emissions always has a supply chain behind it: extracting and transporting the fuel. A zero there means the chain was priced from the wrong mix. Green power is the exception: its chain covers only biomass, and is a real zero on a grid that burns none.
Every green-electricity zero is exactly zero and says why
Passed
Why it matters A green-tariff factor is zero by rule. Any other number, or a zero with no stated reason, would mean the rule was applied wrongly.
Green-electricity zeros cover power generation only
Passed
Why it matters Certificates cover the power plant's emissions, not grid losses or the upstream fuel chain. A zero on those stages would understate your Scope 2 and Scope 3 figures.
Only a total we computed may mix GWP vintages
Passed
Why it matters A published row states one GWP vintage. A mix of AR5 and AR6 can only come from a total assembled out of several rows, and saying so tells you the number was computed, not published.
Spend factors state their price year and basis
Passed
Why it matters A 2019 euro is not a 2024 euro, and a purchaser price includes margins a basic price does not. Without both, spend footprints drift.
One default value per factor and year
Passed
Why it matters Two defaults for one year give two answers to the same lookup.
No electricity or heat factor answers network losses against its stage
Passed · 4 in all libraries
Why it matters A figure per unit delivered to the meter or the building includes what the grid or the heat network loses on the way, and one per unit generated at the plant does not. A factor whose library says the opposite of its stage is listed, so the stage can be corrected and the comparison with other grids stays fair.
Every value has a number, a GWP version and a reference year
Passed
Why it matters Without the number there is nothing to multiply. Without the GWP version or the year, you cannot tell whether two values are comparable.
Only a library cleared for it lists factors without their number
Passed
Why it matters Some publishers' numbers reach us after their factors, so we list the factor and show its value as withheld until the number arrives. Every other library must ship each number: a listed factor without one there is a loading error.
Product footprints headline fossil carbon, like EPDs
Passed
Why it matters EPDs headline fossil carbon and keep biogenic and land-use carbon apart. A product footprint that headlines the net total instead can differ by a few percent, so two steels or two devices no longer compare like for like.
No factor description is too long to display in full
Passed · 5 in all libraries
Why it matters Text beyond the limit is cut short on the factor page, so part of what the publisher wrote shows only in the download.
The library-wide answers on what a factor covers are up to date
Passed
Why it matters Some questions, such as whether a figure includes transport, are answered once for a whole library. If the stored answers fall behind, a factor's details can tell you something we no longer state.
Every library-wide answer applies to at least one factor
Passed · 3 in all libraries
Why it matters An answer about a category or stage the library no longer covers changes nothing you see. It is listed so it can be removed.
Every excused arithmetic disagreement is stated
Passed
Why it matters Where a publisher's own total does not equal its parts and we serve it anyway, the exception is listed on every audit run rather than left in code where nobody sees it.
Every reference year falls between 1960 and next year
Passed
Why it matters A year outside that range points to a typo or a misread column, and would put the value in the wrong period when you filter by year.
Each library's current edition is the one its values come from
Passed
Why it matters Library pages, exports and search read which edition is current from one flag, the factors from another. If the two disagree, a search can serve one edition while the export names another.
No two editions of a library share a release date
Passed
Why it matters The newest edition is picked by its release date. If two editions share one, the pick falls back to the edition label, where 23.6 reads as newer than 23.11, so older numbers can be served as current.
The parts of a total are never listed twice under one label
Passed
Why it matters A group that repeats a part label is a list of terms, not a split of the total, so adding its rows up would count some emissions twice.
Every residual mix has its green-tariff counterpart
Passed
Why it matters Market-based Scope 2 reporting needs both: the residual mix for ordinary contracts and a zero for certified green power. With one missing, you have to find it elsewhere.
Every conservative value carries the same label
Passed
Why it matters Some publishers print each value twice: a typical value and a conservative one, marked up for regulatory use. One shared label lets you pick either across libraries; a second spelling would hide some conservative values from that filter.
Every publisher's quality rating system is read
Passed
Why it matters If we do not read a publisher's rating system, its values are treated as unrated and marked down, although the publisher rated them.
Every factor is filed under the most specific category its source allows
Passed · 4,552 in all libraries
Why it matters Some factors sit in a broad category because their source covers several narrower ones. They are listed so a finer mapping can place them more precisely where the source allows it.
Every factor has a category
Passed
Why it matters A factor with no category drops out of every category filter and comparison. Without this check, a library with no category mapping would load unlabelled, and nothing would say so.
Every categorised factor has a GHG Protocol scope
Passed · 2 in all libraries
Why it matters Without a scope, you cannot tell whether the factor belongs in Scope 1, 2 or 3 of your inventory, and you have to place it yourself.
Single-gas values have their AR6 version
Passed · 8 in all libraries
Why it matters A kilogram of one refrigerant is worth its GWP, so it can be restated in AR6 exactly. Blends and untagged gases stay on their published vintage, which can move a leak's footprint by several percent or more.
No factor answers a question that does not arise for it
Passed · 11 in all libraries
Why it matters Some questions only make sense for some kinds of factor. An answer where the question should not arise is either misplaced, or a sign the kind is too coarse for that factor, so each case is reviewed.
A supplier named in the source is linked to the factor
Passed
Why it matters If the supplier is named but not linked, you cannot filter by supplier or tell a company's own figure from a generic one.
A part covering the same scope as its total is linked to it
Passed
Why it matters When a part and the total beside it cover exactly the same scope, nothing in the numbers tells them apart. Linking them stops you adding a part to the total that already contains it.
Every device total that includes its use also gives the manufacturing share (embodied emissions)
Passed · 112 in all libraries
Why it matters A device footprint that includes years of electricity use is not the manufacturing number you need for a purchase, and if you also count the device's electricity you count its use twice. Devices whose publisher prints no use share are listed as known gaps.
No plug-in vehicle supply-chain estimate is rated above what its method allows
Passed
Why it matters The supply chain of the electricity a plug-in vehicle draws is estimated from the vehicle's own figure and four grid figures. That estimate has a highest rating it can earn, and it never outranks any figure it is built from. When one of them is withheld, so is the estimate. A better rating would lead you to trust it more than it deserves.
A year in a factor's name matches its reference year
Passed
Why it matters A name like “Grid 2019” on a 2023 value usually means a yearly series was flattened, so you could apply one year's figure to another.

How the audit works

What can I do with this data?

Open licence · credit the publisher

afolu

Open licence · ghgp-india-terms

Use it to calculate my own footprint: Yes
Publish my footprint results: Yes, if
you credit the publisher
you say what you changed
you imply no endorsement by the publisher
Share the file with my customers: Unclear: ask GHG Platform India
Put the factors in a product I sell: Unclear: ask GHG Platform India
Modify it or combine it with my own data: Yes, if
you credit the publisher
you say what you changed
you imply no endorsement by the publisher

Publisher's published terms, checked on 14 Oct 2026

GHG Platform India's Usage Policy: 'Any reproduction or redistribution of the material(s) and information displayed and published on this Website/GHG Platform India/Portal shall be accompanied by a due acknowledgement and credit to the GHG Platform India for such material(s) and information. You must give appropriate credit, provide a link, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the GHG Platform India endorses you or your use.' The policy names redistribution, but it is a site's published terms, not a named licence, a statute or a written confirmation, so sharing and embedding stay unclear; the request for a written confirmation bounced (D-7). No NonCommercial or ShareAlike term: tier open (IMP-0067).

Credit line

Source: GHG Platform India (Dhingra, Singh and Mehta 2019, AFOLU sector). Normalised by open-climate.ai, https://open-climate.ai/factors/libraries/ghgp_india/ (CC BY 4.0)

Not legal advice: the publisher's terms prevail.

Full terms

energy

Open licence · ghgp-india-terms

Use it to calculate my own footprint: Yes
Publish my footprint results: Yes, if
you credit the publisher
you say what you changed
you imply no endorsement by the publisher
Share the file with my customers: Unclear: ask GHG Platform India
Put the factors in a product I sell: Unclear: ask GHG Platform India
Modify it or combine it with my own data: Yes, if
you credit the publisher
you say what you changed
you imply no endorsement by the publisher

Publisher's published terms, checked on 14 Oct 2026

GHG Platform India's Usage Policy: 'Any reproduction or redistribution of the material(s) and information displayed and published on this Website/GHG Platform India/Portal shall be accompanied by a due acknowledgement and credit to the GHG Platform India for such material(s) and information. You must give appropriate credit, provide a link, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the GHG Platform India endorses you or your use.' The policy names redistribution, but it is a site's published terms, not a named licence, a statute or a written confirmation, so sharing and embedding stay unclear; the request for a written confirmation bounced (D-7). No NonCommercial or ShareAlike term: tier open (IMP-0067).

Credit line

Source: GHG Platform India. Normalised by open-climate.ai, https://open-climate.ai/factors/libraries/ghgp_india/ (CC BY 4.0)

Not legal advice: the publisher's terms prevail.

Full terms

How to read these answers

Coverage

What the library covers, by category and by boundary. Click a slice to drill in, then a sub-category or a boundary to filter the factors below.

By category

101factors

Direct emissions6160.4%
Fuels4039.6%

Click a slice to see what is under it. A name opens its category page; its swatch hides it from the ring.

By boundary

101factors

Click a slice to see what is under it. Click a name to hide it from the ring.

Browse factors

Currency

top 0 matches

Saved	Unfold	Factor	Region	Boundary	Unit

Versions

How this works

Version	Published	Loaded	Status	Source
2022-seriesenergy	1 Sept 2022	17 Oct 2026	Served	Source
2019-seriesafolu	1 Sept 2019	15 Oct 2026	Served	Source

Methodology

How this works

Every factor cell is one gas per unit of activity: carbon dioxide, methane or nitrous oxide, in gas mass. The publisher applies no warming potential to its factors. We weight them with the IPCC Sixth Assessment Report 100-year values: 29.8 for fossil methane, 27.0 for methane of biological origin (livestock, rice, charcoal and wood), 273 for nitrous oxide.
CO2 from charcoal and wood is kept apart and not counted in the CO2e we serve. The workbook prints 112 tonnes of CO2 per TJ for charcoal and 0 for wood.
Fuel factors are printed per TJ of fuel on the net calorific value and served per kWh of fuel (×0.0000036). They are factors for the fuel burnt in each use, not for the electricity a plant delivers.
Coal mining methane is printed in tonnes of methane per tonne of coal, by mine type (underground or open cast), by stage (mining or post-mining) and, for underground mines, by the gassiness of the seam (degree I to III). We check each value against the volume column beside it and the workbook's own conversion (1 m3 of methane = 0.0006802 tonnes).
Oil and gas methane uses four units in one block: per well, per thousand tonnes of oil produced, per million tonnes of refinery throughput, and per million cubic metres of gas. Each is converted on its own: per kg of oil and per kg of refinery throughput, per cubic metre of gas, and per well as a count.
Livestock factors are per head per year. Rice factors are printed in kg of methane per hectare without a period; we serve them per hectare per year.
The reference year is the edition year (2022 for energy, 2019 for livestock and rice), since neither workbook prints a data year for its factors. The coal mining and oil and gas blocks are headed "(INCCA 2007)" and take 2007.

Edition year on 85 factors (2022 energy combustion, 2019 AFOLU), which print no data year; 2007 on the 16 coal-mining and oil-and-gas fugitive rows, whose block headings print (INCCA 2007).

What we import

101 factors, one value each, all for India.
Energy: 40 fuel combustion factors (14 for electricity generation, 17 for transport by fuel and mode, 9 for residential, commercial, agriculture and fisheries use), 8 coal mining methane factors and 8 oil and gas methane factors.
Agriculture: 19 enteric fermentation factors and 19 manure management factors by animal (cattle and buffalo by dairy use and age, sheep, goats, horses, donkeys, camels, pigs, poultry), and 7 rice factors by water regime.
Factors keep the workbook's block headings and labels and are placed in the open-climate.ai category tree. The workbooks print no classification code.
Not imported: the fuel densities, the warming potential tables and the methane conversion constant, which are reference values rather than factors; the second copy of the livestock table printed lower on the same sheet; the carbon stock, biomass and crop residue parameters of the land use sheets; and the four other workbooks, which hold emission estimates, not factors.

The fuel factors cover combustion only. Beside each fossil fuel factor, open-climate.ai adds an estimated well-to-tank leg (the emissions of extracting, processing and transporting the fuel) and a well-to-use total, each as its own factor marked as an estimate. The leg is the published combustion factor times the ratio of well-to-tank to combustion emissions for the same fuel, taken from the UK Government's 2026 greenhouse gas conversion factors. 36 of the 40 fuel combustion factors get a leg, every one rated very low quality. Indian non-coking coal and railway coal take the ratio of sub-bituminous coal, low-sulphur heavy stock that of fuel oil, aviation turbine fuel that of jet fuel and kerosene that of burning oil. Charcoal and wood get none: their CO2 is biogenic and left out, so a multiple of what remains would mean nothing. The coal mining, oil and gas, livestock and rice factors are not fuels burnt and get no leg. The legs and totals carry the same terms as GHG Platform India's factors. The platform's own numbers are unchanged: leave out estimated factors (is_estimated) to keep them only. How the fuel legs are estimated.

Licence

How this works

Open. The site's Usage Policy allows reproduction and redistribution of its material: "Any reproduction or redistribution of the material(s) and information displayed and published on this Website/GHG Platform India/Portal shall be accompanied by a due acknowledgement and credit to the GHG Platform India for such material(s) and information. You must give appropriate credit, provide a link, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the GHG Platform India endorses you or your use." Using the factors for your own footprint is allowed. Publishing results and combining the values with other data are allowed with credit, a link and changes marked, without suggesting endorsement. Sharing the values with customers and embedding them in a product are not settled: the policy names redistribution, but it is a site policy rather than a named licence, the site footer also reads "All rights reserved", and we have not yet obtained GHG Platform India's written confirmation. Confirm with GHG Platform India before you do. Attribution: "Source: GHG Platform India". Last verified 2026-10-14.

What can I do with this data?

Credit line: Source: GHG Platform India

ghgp-india-terms

You must give appropriate credit, provide a link, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the GHG Platform India endorses you or your use.

Limitations

The set mixes sources and vintages: the net calorific values and CO2 factors come from the Indian Network for Climate Change Assessment (INCCA) and India's second Biennial Update Report, the methane and nitrous oxide factors of fuel combustion are labelled as IPCC defaults, and the coal mining and oil and gas methane factors come from INCCA's 2007 assessment. On the agriculture side, the cattle and buffalo factors come from India's Second National Communication, and those for sheep, goats, horses, donkeys, camels, pigs and poultry are IPCC 2006 defaults.
Five cells differ from the IPCC defaults they are labelled with: nitrous oxide for coking coal, non-coking coal and lignite in electricity generation is 1.4 kg per TJ where IPCC 2006 gives 1.5 (1.4 is the earlier 1996 value), and LPG in electricity generation prints 3 kg of methane and 0.6 kg of nitrous oxide per TJ where IPCC gives 1 and 0.1. Several transport pairs of methane and nitrous oxide also differ from the IPCC 2006 mobile defaults (navigation diesel takes the road values, for example); the effect on CO2e is under 1 %. We load them as printed.
The refinery throughput methane factor (0.068 tonnes per million tonnes) is far below the IPCC range for refinery methane. INCCA's 2007 assessment prints the same number and unit, so the platform copied it faithfully and the unit may be in error at its source. We load it as printed.
The livestock manure nitrous oxide factors are very small (0.0004 to 0.0074 kg per head per year), and the workbook does not say which manure management practices they assume. We load them as printed.
The rice factors print no period. A season is the likely reading, and rice in India is often grown twice a year on the same land, so the per-year value may understate a double-cropped hectare.
The values are rated medium quality. The estimated well-to-tank legs and well-to-use totals are rated very low, and are in CO2e on the GWP set of their source (AR5 for the UK ratios), while the platform's own gases are weighted at AR6.
How quality tiers are set.

Changelog

2026-10-15: energy factors (Phase IV, version 3, 2022) and agriculture factors (Phase III, version 3, 2019) loaded, with estimated well-to-tank legs and well-to-use totals beside 36 fossil fuel factors.