Industrial process emissions: emission factors

Industrial process emissions: calcination, chemical reactions, solvent use. From 13 libraries, filed in one model so one publisher's factor compares with another's.

CategoryDirect emissions
Factors
306
Libraries
13
Largest library

97 factors, 32%

Every gas's GWP under AR4, AR5 and AR6, side by side

Median 0.522 kgCO₂e/kg over 212 factors, from -0.595 to 81.9.

Group: Per kg, Process emissions

How much CO₂e, at a glance

The median of the largest groups that compare. A group shares one unit, one boundary and one accounting method, so a card never mixes them.

  • Per kg

    Process emissions

    0.522 kg CO₂e

    Median of 212 factors. Half of them sit between 0.198 and 1.34.

  • Per kg processed

    Process emissions

    0.449 kg CO₂e

    Median of 25 factors. Half of them sit between 0.415 and 0.629.

  • Per kWh

    Process emissions

    0.153 kg CO₂e

    Median of 17 factors. Half of them sit between 0.0563 and 0.23.

  • Per kg

    Own operations

    0.224 kg CO₂e

    Median of 12 factors. Half of them sit between 0.073 and 3.08.

Source: open-climate.ai catalogue, version 2360, coverage summed over libraries.

How far apart the factors are

One row per comparable group, each chart on its own scale. Physical units and spend never share a chart.

  • Lowest to highest
  • Middle half of the factors
  • Median

Per kg

GroupFactorskg CO₂e per kgLowestMiddle halfMedianHighest
Process emissions212-0.5950.198 to 1.340.52281.9
Own operations120.0180.073 to 3.080.2243.66

Per kg processed

GroupFactorskg CO₂e per kg processedLowestMiddle halfMedianHighest
Process emissions250.150.415 to 0.6290.4493.67

Per kWh

GroupFactorskg CO₂e per kWhLowestMiddle halfMedianHighest
Process emissions170.00009830.0563 to 0.230.1530.999

Per m²

GroupFactorskg CO₂e per m²LowestMiddle halfMedianHighest
Process emissions114.6669.8 to 2,49027646,900

Per kg_dry_solids

GroupFactorskg CO₂e per kg_dry_solidsLowestMiddle halfMedianHighest
Own operations90.442.46 to 3.062.963.26

Per L

GroupFactorskg CO₂e per LLowestMiddle halfMedianHighest
Own operations70.0008360.0012 to 2.540.002012.91

Per m³ processed

GroupFactorskg CO₂e per m³ processedLowestMiddle halfMedianHighest
Process emissions50.3131.16 to 5871.962,270

Source: open-climate.ai catalogue, version 2360, coverage summed over libraries.

Which IPCC assessment report

Each IPCC assessment report revises the warming potential of every gas, so the same leak weighs more or less under AR5 than under AR6. Compare factors from one report only, and take the report your inventory states.

  • AR6

    252 factors · 5 licence-restricted

  • AR5

    54 factors

What does each total include?

4 boundaries are in use in this category, and a total on one does not compare with a total on another. Read down a column to see what it counts.

Part of the totalProcess emissions271 factorsOwn operations28 factorsEnd of life5 factorsCombustion2 factors
Fuel combustionNot includedNot statedNot statedNot stated
Fugitive releasesNot includedNot statedNot statedNot stated

Varies: some factors on this boundary include it and others do not. Not stated: the publisher does not say. How system boundaries work

Values not shown

5 of the 306 factors in this category are not shown. Licence-restricted: ecoinvent (5). They are counted on this page. Their values are never drawn, ranked or used in a median. How licences work here

Which factor should you use?

A released gas is priced by its global warming potential. Every gas you report should take it from the same IPCC report.

  • Gas released on your site

    Leaks from refrigeration, air conditioning or a process. Scope 1.

    Multiply the kilograms lost by the factor of that gas.

  • One assessment report

    Your method names an IPCC report, such as AR5 or AR6.

    Use the factors of that report for every gas, never a mix of reports.

  • A refrigerant blend

    A mix of several gases, such as R-410A.

    Use the blend's own factor, or add up its gases by their share of the mass.

Libraries that publish these factors

13 libraries, by number of factors.

LibraryFactorsBoundaryValuesLatest
SEMARNAT97Process emissions, Own operationsShown2025
Japan MOE53Process emissionsShown2025
NAEI41Process emissionsShown2024
MEE37Process emissionsShown2026
TurkStat17Process emissionsShown2024
HuellaChile14Process emissionsShown2025
NGA12Process emissionsShown2025
IPCC9Process emissions, CombustionShown2019
5 more libraries
GIR7Process emissionsShown2021
MONRE7Process emissionsShown2022
ADEME5Process emissionsShown2014
ecoinvent5End of lifeLicence-restricted2025
K-ETS MRV2Process emissionsShown2013

Source: open-climate.ai catalogue, version 2360, coverage summed over libraries.

Other subcategories

Have a procurement file?

Send it and we'll match every line.

Match my file

Highlighted factor pages

Sorted by library. Each factor is also on its library's page.

ActivityLibraryRegionBoundaryValueYear
Steel production - Coke oven gas (COG)GIRKoreaProcess emissions1.53 kgCO₂e/kg2021
Lime production - Mineral productionHuellaChileChileProcess emissions0.695 kgCO₂e/kg2025
Tier 1 Gas-Specific Emission Factors For Process GHG Emissions From Electronics Manufacturing - SF6; MEMS (micro-electromechanical systems)IPCCWorldProcess emissions46,900 kgCO₂e/m²2019
Tier 1 Gas-Specific Emission Factors For Process GHG Emissions From Electronics Manufacturing - SF6; SemiconductorsIPCCWorldProcess emissions1,260 kgCO₂e/m²2019
Carbonization Absorption Process - Calcium Carbonate (CaCO₃)MEEChinaProcess emissions-0.44 kgCO₂e/kg2026
Lime production - CO2 emission factor of raw material for dolomitic quicklime production (% CaO: 55-57; % MgO: 38-41)MONREVietnamProcess emissions0.77 kgCO₂e/kg2022
Glass - general - LimestoneNAEIUnited KingdomProcess emissions0.44 kgCO₂e/kg2024
Soda Ash UseNGAAustraliaProcess emissions0.415 kgCO₂e/kg2025
Facilities producing zinc - Waelz KilnSEMARNATMexicoProcess emissions3.66 kgCO₂e/kg2025
Nitric acid productionTurkStatTurkeyProcess emissions1.55 kgCO₂e/kg2024