Waste-derived fuels emission factors

Fuels derived from waste (RDF, SRF, used oils) as fuel commodities. From 27 libraries, filed in one model so one publisher's factor compares with another's.

Factors
255
Libraries
27
Largest library

56 factors, 22%

Median 0.277 kgCO₂e/kWh over 194 factors, from 0.00322 to 0.522.

Group: Per kWh, Combustion

How much CO₂e, at a glance

The median of the largest groups that compare. A group shares one unit, one boundary and one accounting method, so a card never mixes them.

  • Per kWh

    Combustion

    0.277 kg CO₂e

    Median of 194 factors. Half of them sit between 0.11 and 0.368. 1 more is licence-restricted and left out.

  • Per kg

    Combustion

    2.29 kg CO₂e

    Median of 14 factors. Half of them sit between 1.21 and 2.96.

  • Per kWh

    Useful heat, full life cycle

    0.0773 kg CO₂e

    Median of 10 factors. Half of them sit between -0.0347 and 0.0773.

  • Per kWh HHV

    Combustion

    0.258 kg CO₂e

    Median of 8 factors. Half of them sit between 0.221 and 0.296.

Source: open-climate.ai catalogue, version 2360, coverage summed over libraries.

How far apart the factors are

One row per comparable group, each chart on its own scale. Physical units and spend never share a chart.

  • Lowest to highest
  • Middle half of the factors
  • Median

Per kWh

GroupFactorskg CO₂e per kWhLowestMiddle halfMedianHighest
Combustion1940.003220.11 to 0.3680.2770.522
Useful heat, full life cycle10-0.169-0.0347 to 0.07730.07730.238
Well-to-use50.001350.161 to 0.2290.2180.37

Per kg

GroupFactorskg CO₂e per kgLowestMiddle halfMedianHighest
Combustion140.5231.21 to 2.962.293.28

Per kWh HHV

GroupFactorskg CO₂e per kWh HHVLowestMiddle halfMedianHighest
Combustion80.006570.221 to 0.2960.2580.32

Per kwh_primary

GroupFactorskg CO₂e per kwh_primaryLowestMiddle halfMedianHighest
Well-to-use60.001350.00312 to 0.01140.00950.0116

Source: open-climate.ai catalogue, version 2360, coverage summed over libraries.

What each total is made of

A fuel's factor adds two parts: the CO₂e of burning it, and the CO₂e of extracting, refining and delivering it (upstream fuel). Where a publisher prints both, the bar splits them; where it prints one total, the bar is drawn whole.

Combustion (direct, at point of use) (kWh), 16 factors

Combustion (direct, at point of use), kgCO₂e per kWh

Boundary: Combustion (direct, at point of use) · Basis: Not stated

  • Total, not split by the publisher

The bars share one scale within this group only.

Combustion (direct, at point of use) (kg), 5 factors

Combustion (direct, at point of use), kgCO₂e per kg

Boundary: Combustion (direct, at point of use) · Basis: Not stated

  • Total, not split by the publisher

The bars share one scale within this group only.

Combustion (direct, at point of use) (L), 3 factors

Combustion (direct, at point of use), kgCO₂e per L

Boundary: Combustion (direct, at point of use) · Basis: Not stated

  • Total, not split by the publisher

The bars share one scale within this group only.

One thing, several units

Each unit is its own comparison. A factor per litre never sits on one axis with a factor per kilogram, and a factor per unit of spend never sits with a physical one: convert your quantity into the factor's unit, not the factor.

  • per kWh

    211 factors · 1 licence-restricted

    Boundaries: Combustion (direct, at point of use), Useful heat, full life cycle (fuel cycle and heating system), Well-to-use (upstream, burn or generation, network losses), and Cradle to gate

  • per kg

    23 factors · 4 licence-restricted

    Boundaries: Combustion (direct, at point of use), Cradle to gate, Upstream fuel (well-to-tank), and Well-to-use (upstream, burn or generation, network losses)

  • per kWh HHV

    9 factors

    Boundaries: Combustion (direct, at point of use) and Well-to-use (upstream, burn or generation, network losses)

  • per kwh_primary

    6 factors

    Boundaries: Well-to-use (upstream, burn or generation, network losses)

  • per L

    5 factors

    Boundaries: Combustion (direct, at point of use) and Upstream fuel (well-to-tank)

  • per kg_dry_solids

    1 factor · all licence-restricted

    Boundaries: Combustion (direct, at point of use)

What does each total include?

5 boundaries are in use in this category, and a total on one does not compare with a total on another. Read down a column to see what it counts.

Part of the totalCombustion222 factorsWell-to-use13 factorsUseful heat, full life cycle10 factorsCradle to gate6 factorsUpstream fuel4 factors
Upstream fuel (well-to-tank)Not includedIncludedIncludedNot statedNot stated
Fuel combustionIncludedIncludedIncludedNot statedNot stated
Purchased electricity and heatNot includedNot statedNot statedNot statedNot stated
Capital goodsNot includedIncludedIncludedNot statedNot stated
InfrastructureNot includedNot includedNot statedNot statedNot stated

Varies: some factors on this boundary include it and others do not. Not stated: the publisher does not say. How system boundaries work

Values not shown

6 of the 255 factors in this category are not shown. Licence-restricted: AusLCI (2), ecoinvent (2), and UPME (2). They are counted on this page. Their values are never drawn, ranked or used in a median. How licences work here

Which factor should you use?

What you report decides the boundary. The unit follows your invoice.

  • Fuel you burn yourself

    Vehicles, boilers and generators you operate.

    Use the combustion factor, per litre or per kWh as invoiced.

  • The supply chain of that fuel

    Extraction, refining and delivery of what you burned.

    Use the upstream fuel factor of the same library and year.

  • One number for both

    A footprint that does not split scopes.

    Use the well-to-wheel total, never added to either part.

  • Only a spend figure

    You know what you paid, not the quantity.

    Use a spend factor in the currency and year of the invoice.

Libraries that publish these factors

27 libraries, by number of factors.

LibraryFactorsBoundaryValuesLatest
JRC-IDEES56CombustionShown2023
IPCC44CombustionShown2006
DCE22CombustionShown2024
NAEI21CombustionShown2024
TurkStat17CombustionShown2024
Statistics Finland13CombustionShown2026
ProBas12Useful heat, full life cycle, Combustion, Cradle to gateShown2015
Japan MOE7CombustionShown2025
19 more libraries
UBA (DE)7Well-to-useShown2024
BAFU6CombustionShown2026
EPA Hub6CombustionShown2026
ISPRA6CombustionShown2024
NGA5CombustionShown2025
DESNZ4Well-to-use, CombustionShown2026
KEITI LCI4Cradle to gateShown2022
ADEME3Well-to-useShown2020
CoM3CombustionShown2024
SEMARNAT3CombustionShown2025
SSB3CombustionShown2024
AusLCI2Upstream fuelLicence-restricted2023
DEA2CombustionShown2024
ecoinvent2Cradle to gate, Upstream fuelLicence-restricted2025
Naturvårdsverket2CombustionShown2024
UPME2CombustionLicence-restricted2016
MOENV coefficients1Upstream fuelShown2014
RVO1CombustionShown2026
UOS1CombustionShown2024

Source: open-climate.ai catalogue, version 2360, coverage summed over libraries.

Other subcategories

Have a procurement file?

Send it and we'll match every line.

Match my file

Highlighted factor pages

Sorted by library. Each factor is also on its library's page.

ActivityLibraryRegionBoundaryValueYear
Waste in municipal waste incineration plants (KVA)BAFUSwitzerlandCombustion0.167 kgCO₂e/kWh2023
Municipal wastes (biomass fraction) - Other biomass, carbon neutralCoMWorldCombustion0.00685 kgCO₂e/kWh2024
Municipal waste - Chemical and PetrochemicalDCEDenmarkCombustion0.173 kgCO₂e/kWh2024
Municipal waste - Mining and QuarryingDCEDenmarkCombustion0.173 kgCO₂e/kWh2024
Municipal waste - Public power, Gas turbinesDCEDenmarkCombustion0.167 kgCO₂e/kWh2024
Waste OilDEADenmarkCombustion0.264 kgCO₂e/kWh2024
Liquid fuels - Waste oilsDESNZUnited KingdomCombustion2.75 kgCO₂e/L2026
Other Fuels - Solid - TiresEPA HubUnited StatesCombustion0.301 kgCO₂e/kWh HHV2026
CH4 Emission Factor for Stationary Combustion (kg/TJ on a net calorific basis) - Municipal Wastes (non-biomass fraction), CH4; 1.A.1 Energy IndustriesIPCCWorldCombustion0.00322 kgCO₂e/kWh2006
N2O Emission Factor for Stationary Combustion (kg/TJ on a net calorific basis) - Waste Oils, N2O; 1.A.4.b Residential + 1.A.4.c.i StationaryIPCCWorldCombustion0.00393 kgCO₂e/kWh2006
Italy electricity-sector fuel combustion emission factor - solid recovered fuel, fossil fraction, per unit mass of fuelISPRAItalyCombustion0.945 kgCO₂e/kg2024
Fuel hydrocarbon oil manufactured from waste plasticsJapan MOEJapanCombustion2.62 kgCO₂e/L2025
Refuse paper and plastic fuel (RPF)Japan MOEJapanCombustion1.64 kgCO₂e/kg2025
Waste oil (excluding vegetable and animal oils), and fuel hydrocarbon oil manufactured from itJapan MOEJapanCombustion2.64 kgCO₂e/L2025
Waste plastics (municipal waste)Japan MOEJapanCombustion2.76 kgCO₂e/kg2025
Waste tyresJapan MOEJapanCombustion1.64 kgCO₂e/kg2025
Industrial waste (non-renewable)JRC-IDEESBulgariaCombustion0.515 kgCO₂e/kWh2023
Non-renewable municipal wasteJRC-IDEESLatviaCombustion0.33 kgCO₂e/kWh2023
Power stations - Scrap tyresNAEIUnited KingdomCombustion0.192 kgCO₂e/kWh2024
Waste - IndustryNaturvårdsverketSwedenCombustion0.127 kgCO₂e/kWh2004
Biomass, municipal and industrial materials, if combusted to produce heat or electricityNGAAustraliaCombustion0.00657 kgCO₂e/kWh HHV2025
Waste CHP plant, steam turbine, DE, 2005, heat, credit on the electricity mixProBasGermanyUseful heat, full life cycle-0.071 kgCO₂e/kWh2005
WasteRVONetherlandsCombustion0.386 kgCO₂e/kWh2026
Special waste - BoilersSSBNorwayCombustion3.28 kgCO₂e/kg2024
Other fossil by-products and wastes - Plastics wasteStatistics FinlandFinlandCombustion0.267 kgCO₂e/kWh2026
Other waste-based mixed fuels - Rubber wasteStatistics FinlandFinlandCombustion0.245 kgCO₂e/kWh2026
Fuel combustion: pulp, paper and print - Other fossil fuelsTurkStatTurkeyCombustion0.368 kgCO₂e/kWh2024
biogenic fraction of waste - Final energy consumption, heat & coolingUBA (DE)GermanyWell-to-use0.00135 kgCO₂e/kWh2024